631502
6
Zoom out
Zoom in
Previous page
1/32
Next page
EnglishEnglish
REPEAT/INTRO/RANDOMMODE (BYREMOTECONTROL)
Press the Repeat/Intro/Random button (4) on the remote control before or during playback,
a single track, single folder (MP3 only) or all the tracks can be played in different mode as
follows:
FOR MP3/WMA
INDICATOR
INTROPLAYMODE INTRO
RANDOM MODE RANDOM
OFF MODE ------------
Repeat play
You can listen the desired tracks or folder repeatedly by this function.
Intro play
You can listen the beginning (10 seconds) of each track in a cd by this function & saving
your time to search the desire song
Random play
You can listen all the tracks or folder in a random order by this function
USB/SDPROGRAMMING (BYREMOTECONTROL)
the system is at stop mode before programming:
1. Set in USB mode with the Source button (10).
2. Press the “PROGRAM” button (5), PROG “ will appear on LCD display. Moreover, it
will indicate program no. and digits for track no. to be programmed.
3. Select a desired track by pressing SKIP or buttons (7).
4. Press the program button to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press “ PLAY/PAUSE “ button
(6) to play the disc in assigned order.
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY
CARD CONNECTING
The system is able to decode and playback all MP3 /WMA file which stored in the memory
media with USB connecting port or SD/MMC memory card.
1. Set Function selector (7) at USB mode and then press SOURCE button (10) to select
“ USB or CARD” mode.
2. Plug-in the USB plug with the face up & make sure it going into completely or insert
the memory card in the direction of the arrow as shown in the label on the underside
of the MEMORY CARD slot cover. Insert straight without bending.
Connecting the USB upside down or backwards could damage the audio system or
the storage media (usb thumb drive / sd/mmc card). Check to be sure the direction is
correct before connection.
7 8
REMARK
- The system can detect and read the file under mp3
and wma format only though the usb port.
- If connect the system to MP3 player via the usb
socket, due to variances inMP3 encoding format,
some mp3 player may not be able to play via the
usb socket. this is not a maul-function of the
system.
(1) REPEAT 1 (2) REPEATALL TRACK
(5) OFF MODE (4) RANDOM (3) INTRO PLAY
PLAY MODE ON LCD DISPLAY
REPEATSINGLETRACK
REPEATALL TRACKS ALL
7. To cancel the programmed file, press PROGRAM button on remote handset
during STOP mode until PROG is disappear on LCD display (2).
3. The system will start reading the storage media automatically after connecting, and
LCD display (2) will show the total number of MP3 files, then will start playback
automatically.
Up to 10 tracks can be programmed for MP3 file and play in any order. before use, be sure
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar TTR-1923UCEN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar TTR-1923UCEN in the language / languages: Dutch as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info