592260

Roadstar TS-810 SS Manual

2
Zoom out
Zoom in
Previous page
1/13
Next page
EnglishEnglish
1 2
TS-810/SS
Cool touch wall Toaster
Before Use
Carefully remove your toaster from its packaging.
You may wish to store the packaging for future use.Otherwise dispose the packaging according
to the local rules on recycling.
Please read this instruction manual carefully and familiarize yourself with your new Toaster
before using it for the first time. Please retain this manual for future reference.
BOX CONTENTS
• Toaster TS-810/SS
• Instruction manual
• Warranty card
ELECTRICAL SAFETY
Caution: For your own safety read the following instructions carefully before attempting to connect
this unit to the mains. Before switching on make sure that the voltage of your electricity supply is
the same as that indicated on the rating plate.
This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other power
sources may damage the unit. Do not allow this unit to be exposed to rain or moisture.
SAFETY INSTRUCTIONS
Please read this instruction book carefully before operating this toaster.
Retain for future reference.
Positioning your Toaster
Caution: Bread can burn. Do not place or operate the toaster below curtains or other combustible
materials. Do not leave the toaster unattended when in use.
• Do not operate the toaster underneath cupboard units. Ensure the toaster is placed
away from walls.
• Always allow the toaster to cool completely after use before moving it.
• Never move the toaster by placing fingers in or near the bread slot.
Safety
• Ensure the mains lead is kept clear from hot objects and surfaces.
• Ensure close supervision when operating toaster while children are present.
• Always allow the toaster to cool completely after use before storing it.
• Ensure bread fits easily into the slot before using toaster. Torn or thick bread can
cause the toaster to jam.
• NEVER attempt to remove bread if it becomes jammed in the slot, without first
unplugging the toaster from the mains supply. Allow to cool completely before
removal.
• Take care not to damage the internal mechanism when removing bread.
• Internal parts can be easily damaged. Do not touch the internal parts of the toaster with
any implement as this is very dangerous and could cause an electrical hazard.
Special Notes:
When the toaster is plugged in and operating for the first time, there may be a slight burning
odour, as the heating elements warm up. This represents no danger to the user and does not
indicate a defect in the appliance. When using for the first time, allow the toaster to heat up until
the odour clears.
It is advisable to first operate the toaster without placing bread in the slot.
1. Connect the toaster to the mains supply .
2. Set the browning control (B) to the lowest setting (1).
3. Press the loading handle (A) down and allow the heating elements to warm.
4. Allow elements to heat up until burning odour clears.
5. Press CANCEL button (C) to release loading handle.
FEATURES
A. Loading Handle
B. Variable Browning Control
C. CANCEL Button
D. Removable crumb tray
TOASTERS MUST NEVER BE LEFT UNATTENDED WHEN IN USE.
ACCESSIBLE SURFACES CAN REACH HIGH TEMPERATURES DURING OPERATION.
TOASTER OPERATION
• Ensure the toaster is connected to mains supply.
• Place one or two slices of bread or toasts into the slot, adjust the browning control (B)
to achieve the amount of toasting desired, then depress the loading handle (A) until it
latches.
• The toaster will heat up automatically and start toasting.
Note: The loading handle (A) will not latch if the mains supply is not connected.
• To stop toasting press the CANCEL button (C) at any time.
• Lift the loading handle (A) to check the bread during toasting.
• When toasting is finished the loading handle (A) will rise automatically. The toast can
then be safely removed.
• If the toast is not dark enough, you may wish to toast the bread again.
• Adjust the browning control (B) to a lower setting and replace the toast. Ensure the toast
does not burn while re-toasting.
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar TS-810 SS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar TS-810 SS in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info