592194

Roadstar PST-100ENC Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
12
This unit must not be exposed to moisture or rain.
Ensure all connections are properly made before operating the unit.
Do not expose this unit to direct sunlight or heat radiating sources.
Make sure all batteries are inserted according to the proper
polarity. Do not mix old batteries with new ones.
If the unit is not used for a long period of time (more than 1 month),
remove all batteries from their compartment to avoid possible leaking.
- +
- +
WARNINGS
PST-100ENC
Personal Autoreverse Stereo Cassette Player with USB output to encode Audio
files via PC.
FUNCTIONS AND CONTROLS
1. Play Button
2. Direction Selector
3. Continuous AR/Single AR
4. FF Button
5. REW Button
6. Stop Button
7. Volume Control
8. USB Output
9. Eadphone Output
10. Cassette Door OPEN
11. Battery Compartment
12. External DC-3V
POWER SUPPLY
Use with regular batteries
1. Open the battery compartment door, located on behind the cassette door of the unit, by
sliding the door and lift it up.
2. Insert 2 x 1.5V /UM-3/AA size alkaline batteries, following the correct polarity, as indicated
on the unit.
3. Close the battery compartment door.
Use with AC/DC adaptor (not included)
1. Insert the DC plug, at the end of the AC/DC adaptor cord, into the DC 3V INPUT socket
located on the side of the unit (12).
2. Connect the AC/DC adaptor into a 230V ~ 50Hz AC power outlet.
Notes:
• If the AC adaptor is connected when regular batteries are installed, the power supply
automatically switches to the AC power source.
• Use only the recommended AC/DC adaptor. Using other types of adaptor may damage
the unit.
• Make sure that the AC/DC adaptor matches with your household voltage before
connecting it into the wall outlet.
• When not using AC power, disconnect the AC/DC adaptor from the wall outlet.
• Do not touch the AC/DC adaptor with wet hands.
PHONES JACK
Connect the stereo earphones to the Phones jack (9) for private listening.
CASSETTE PLAYBACK
Playback
1. Press the STOP button.
2. Open the cassette compartment door.
3. Insert a recorded cassette with the exposed tape pacing cassette keys.
4. Close the cassette compartment door.
5. Connect the headphones.
6. Press the Play button to start playback.
7. Adjust the Volume control to your desired listening level.
8. Press the Stop button to stop playback at any time.
Fast Forward Function
Press the Fast Forward button (4) to fast forward the tape.
ATTENTION!
Extended listening at high volumes can cause damages to hearing.
English English
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar PST-100ENC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar PST-100ENC in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info