592273

Roadstar KS-250 GR Manual

4
Zoom out
Zoom in
Previous page
1/16
Next page
EnglishEnglish
LCD will show “——” or “0g” each time ZERO is perssed. “——” means not stable, please
wait for a moment. “0g” and meanwhile an icon “o” on lower left corner of LCD mean
“ZERO” function is active. Max.weight capacity remains unchanged.
BATTERY REPLACEMENT
Please open the back board of scale, then take batteries carefully out of the battery
compartment by drawing them sideways out from under the contacts. Do not bend the
contacts back while you do this or they might break. Dispose of the old batteries at the
appropriate collection points.
ADVICE FOR USE & CARE
1. Clean the scale with a slightly damp cloth. DO NOT immerse the scale in water or use
chemical / abrasive cleaning agents.
2. All plastic parts should be cleaned immediately after contact with fats, spices, vinegar and
strongly flavored / colored foods. Avoid contact with acids citrus juices.
3. Always use the scale on a hard, flat surface. DO NOT use on carpet.
4. DO NOT strike,shake or drop the scale.
5. The scale is high precision device.Please take care of it.
6. Please keep it dry.
7. Please check whether battery is installed or in high level if scale can not be turned on.
8. The scale is for family use only, not for commerical purpose.
Specifications and design are subject to possible modifications without notice due to improvement.
BATTERY-CHANGE INDICATOR
When the battery need replacing, the “Lo” will appear on
the screen.
OVER LOAD INDICATOR
When the scale is overloaded the symbol “Err” will appear on
the screen.
“ZERO” OR “TARE” FUNCTION
To weigh different loads consecutively without removing
loads from the scale.
Put first Load on the scale, get weight reading. Press
ZERO button to reset the
LCD reading to “0” before adding next load. You can
repeat this operation.
AUTOMATIC SWITCH OFF
When you step off the scale, it will automatically switch off. (If no
weighing is carried out while the zero is being displayed, the scale
switches itself off automatically after approximate 2 minutes)
LCD will show “——” or “0g” each time ZERO is pressed.
“——” means not stable, please wait for a moment. “0g”
and meanwhile an icon “TARE” on upper left corner of
LCD mean “TARE” function is active. Max. Weight
capacity is reduced by total weight of all loads.
* Under this condition:
By pressing ZERO, you can see the total weight of all
loads on the scale. If you want to weigh more loa ds, just
press ZERO to reset LCD reading to ‘0’ again.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should
not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and how
they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
5
6
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar KS-250 GR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar KS-250 GR in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info