592180
5
Zoom out
Zoom in
Previous page
1/10
Next page
English English
5 6
Insert an audio CD with
the printed side facing out.
Close the CD door.
Press PLAY/PAUSE to start playing.
To pause playing press PLAY/PAUSE, press PLAY/PAUSE again to resume playing.
To stop CD playing, press STOP.
Selecting a different track
Press SKIP/SEARCH once or repeatedly until the desired track number appears in
the LED DISPLAY
Finding a section I interval within a track
Press and hold down SKIP/SEARCH.
When you recognize the passage / interval you want, release SKIP/SEARCH in
order to continue playing.
Repeat playing
To repeat the current track, press REPEAT once and the REPEAT INDICATOR will
flash.
To repeat the entire CD/program, press REPEAT again and the REPEAT INDICATOR
will light up. To return to normal playing, press REPEAT again.
Programming track numbers
Program in the stop status to select and store your CD tracks in the desired sequence.
Up to 20 tracks can be stored in the memory.
Press PROGRAM to start.
Use the SKIP/SEARCH to select your desired track number.
Press PROGRAM to store.
Repeat the above two steps to select and store all desired tracks.
Press PLAY/PAUSE to start playing your CD program.
Reviewing the program
In the stop status, press PROGRAM repeatedly, the LED DISPLAY shows the track
numbers you stored in sequence.
Erasing a program
You can erase the program by pressing STOP once in the program status or by
pressing STOP twice in the program playing status.
Using headphones (not included)
Connect the headphones into the HEADPHONES jack on the CD player.
Adjust the volume to the desired level by tuningPOWER ON/OFF / MUSIC VOLUME.
Use of Microphone with / without CD playing
Switch microphones to the ON position.
Adjust the volume to the desired level by tuning MIC VOLUME.
Speak or sing in normal voice about 1 inch from microphone.
CAUTION
Abnormal operation may occur when the batteries become weak (The symbol no
will be found in the LED display). For normal operation, please always use new
batteries and replace the exhausted batteries immediately.
Feed back may occur when the microphones placed too close to the player. It is
necessary to move the microphones appropriately away from the player body.
Old and new or different type of batteries should not be used in combination.
Remove batteries if they are exhausted or if the set will not be used for a long time.
Do not touch the lens of the CD player.
Do not attempt to disassemble the CD player as laser rays from the optical pickup
are dangerous to the eyes.
Do not expose the set, batteries of CDs to humidity, rain, sand or overheating.
Do not play with your earphones at a high volume.
Always press STOP button to make sure the unit is completely stopped before
turning
"POWER ON/OFF", anti-clockwise to turn off.
Do not attempt to open the CD door during CD playing.
Always keep the CD door closed to prevent the lens from contamination by dust.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar KID-55CD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar KID-55CD in the language / languages: English, German as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info