592276
6
Zoom out
Zoom in
Previous page
1/44
Next page
English English 7 8
in stereo.
Press the MENU BUTTON (19) until select “AUDIO SETTING”, then
press the TUNING/ENTER KNOB (21) and turn again the TUNING/
ENTER KNOB (21) to select between FORCED MONO or STEREO
ALLOWED.
DAB OPERATION
1. Press sequencially the FUNCTION BUTTON (6) to select DAB mode.
2. Extend the DAB antenna at the back of the unit.
AUTOMATIC TUNING
1. Press the MENU BUTTON (19), then move the TUNING/ENTER
KNOB (21) to select FULL SCAN.
2. Press the TUNING/ENTER KNOB (21) to start searching the DAB /
DAB+ station.
MANUAL TUNING
1. Press the MENU BUTTON (19), then move the TUNING/ENTER
KNOB (21) to select MANUAL TUNE.
2. Turn the TUNING/ENTER KNOB (21) to tune manually the desired
station.
3. When tuned a DAB stereo station, the “stereo” will show on the LCD.
4. During DAB reception, press the INFO BUTTON (31) to see the infor-
mation of the playing DAB station on the display, i.e Program Type /
Program No. / Frenquency Range / Signal Strength / Time / Date.
PRESET MEMORY DAB / DAB+
1. When selected the desired station, press and hold the PRESET BUT-
TON (33) for 2 seconds.
2. The display show “Preset Store 1: (Empty)”. Turn the TUNING/ENTER
KNOB (21) to select the desired preset number, then press the
TUNING/ENTER KNOB (21) to store the station.
TURNTABLE OPERATION
VERY IMPORTANT!
To prevent damages from transportation, a
transit screw is located at the upper right side
of the turntable platform. Before start playing,
use a screwdriver and turn the transit screw
in clockwise direction (screw going down)
completely. In case of transportation, remember to clock again this screw
in counter-clockwise direction to prevent damages.
Preparation
1. Open the Record Player Cover.
2. Release the Tonearm Clamp, and remove the stylus protector.
Listening to Records
1. Press the FUNCTION BUTTON (6) to select the TURNTABLE fun-
ction.
2. Place a record on the turntable, over the central spindle. Place the EP
adapter over the central spindle when playing 17cm EP records.
3. Set the Speed Selector (24) to 33/78 or 45 rpm according to the re-
cord.
4. Release the tonearm clamp, and remove the protective cap from the
stylus.
5. Lift the Tonearm with the Tonearm Lift Lever.
6. Move the tonearm to the beginning of the record, or to the start of a
particular track.
TRANSIT
SCREW
Lock Lever Stylus Cover
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar HIF-1999D BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar HIF-1999D BT in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info