647867
9
Zoom out
Zoom in
Previous page
1/52
Next page
4 English
4. Press the PLAY MODE button to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press cd play/pause (2) to play
the disc in assigned order.
7. To cancel the programmed file, press stopbutton.
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA
The system is able to decode and playback all mp3 /wma file which stored in the memory
media with usb connecting port.
1. Set function selector (15) at cd/usb mode and then press FUNCTION button (6) to select
usb.
2. Plug-in the usb plug with the face up & make sure it going into completely.
3. The system will start reading the storage media automatically after connecting, and lcd
display (18) will show the total number of mp3/wma files
4. Repeat the same playback procedure as playing cd/mp3 disc as above.
REMARKS:
The system can detect and read the file under mp3 and wma format only though the usb
port.
If connect the system to mp3 player via the usb socket, due to variances in mp3 encoding
format, some mp3 player may not be able to play via the usb socket. this is not a maul-
function of the system.
Connecting the usb upside down or backwards could damage the audio system or the sto-
rage media (usb thumb drive). Check to be sure the direction is correct before connection.
LISTENING TO TAPE
1. Set the Function button (6) to TAPE mode. The system will start playback automati-
cally after inserting the cassette tape.
2. Press TAPE FORWARD / EJECT Button (33) half inwards during playback mode.
The tape will wind forward.
3. Slightly press the TAPE FORWARD / EJECT Button (33) again to resume playback.
4. Press theTAPE FORWARD / EJECT Button (33) completely inwards and the casset-
te tape will be ejected through the cassette door cover (34).
ENCODING OF CD/PHONO INTO MP3 FILE
The system is able to encode normal cd, cassette or turntable to mp3 format and recording
at memory media with usb connecting port.
CD ENCODING
Encoding 1 track:
1. Perform normal playback of the cd track you want to encode & record,
2. Press record button (9) twice during the playback of the desire track, unit will display.
Encoding is performing now.
3. Press the STOP button to finish recording the track.
Encoding 1 disc:
1. Place a cd with the printed side facing up inside the tray & then close the co door
2. Press the RECORD button (9) twice after focus search completed. unit will display
REC”. Encoding is performing now.
3. After completing of encoding, unit will stop playback automatically.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar HIF-1993BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar HIF-1993BT in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info