592164
4
Zoom out
Zoom in
Previous page
1/29
Next page
EnglishEnglish
34
30) TAPE BUTTON
31) PHONO BUTTON
32) CD STOP BUTTON
33) TAPE FF/EJECT BUTTON
34) TAPE SLOT-IN
35) TOP COVER MECHANISM
36) TURNTABLE
REMOTE CONTROL
BATTERY INSTALLATION
the infra-red transmitter requires 2 pcs CR-2025 size battery for operation.
CONNECTING TO POWER
Before switching on make sure that the voltage of your electricity supply is the same as
that indicated on the rating plate.
For your own safety read the following instructions carefully before attempting to connect
this unit to the mains.
MAINS (AC) OPERATION
This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other
power sources may damage the unit.
CAUTION
To prevent electric shock disconnect from the mains before removing cover. No user
serviceable parts inside. Refer servicing to qualified service personnel.
SAFETY PRECAUTION
Do not allow this unit to be exposed to rain or moisture.
Mains Supply: 230V 50Hz - AC only
This symbol means that this unit is double insulated. An earth connection is not
required.
POWER SUPPLY
Remove the stereo carefully from the box, retaining the packaging for future use.
MW/FM TUNER
Tune to the desired radio station by turning the Tuning control (21).
ANTENNA
For FM reception there is a built-in FM antenna wire (28) at the rear of the unit. Move the
wire around to obtain the best reception.
For MW reception the signals are picked up through a built-in ferrite antenna. Your may
have to orient the unit to obtain the best reception.
37) OPEN / CLOSE CD DOOR.
38) RECin cd or phono mode, press to active
recording function.
39) REPEAT BUTTON
40) PLAY/PAUSE
in cd/usb mode, press
once to start playback. press again to enter
pause mode.
41) skip/search backward
press once
to skip to previous tack.press & hold for search
backward.
42) SKIP/SEARCH forward
press once to
skip to next track, press & hold for search
forward.
43) STOP
in cd/usb mode, press to stop playback or cancel the stored program.
44) + 10 Track Button
45) - 10 Track Button
46) RANDOM BUTTON in cd/usb mode, press to active random function.
47) DELETE button
48) PROGRAM in CD/USBb mode, press to active programming function.
39
37
41
43
44
46
38
40
42
45
47
48
AC POWER
(17) light up.
Press the ON / OFF button for one second to switch ON the unit. The ON indicator
Select the desired frequency band with the Band Selector (14) for FM or (12) for MW
band.
OPERATION
(TURN ON / OFF THE UNIT)
Connect the plug to a mains power inlet 230V AC ~ 50 Hz.
Press the POWER button 1 second to turn ON the unit.
Press and hold the POWER button 3 seconds to turn OFF the unit.
When stop playing song, if nobody switch OFF the unit is switch OFF itself
automatically after 15 minutes.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar HIF-1937TUMPK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar HIF-1937TUMPK in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info