647862
12
Zoom out
Zoom in
Previous page
1/72
Next page
7 English
The system is able to encode normal cd, cassette or turntable to mp3 for-
mat and recording at memory media with usb connecting port.
CD ENCODING
Encoding 1 track:
1.Perform normal playback of the cd track you want to encode & record,
2.Press record button (9) twice during the playback of the desire track,
unit will display. Encoding is performing now.
3.Press the STOP button to finish recording the track.
Encoding 1 disc:
1.Place a cd with the printed side facing up inside the tray & then close the
co door
2.Press the RECORD button (9) twice after focus search completed. unit
will display REC”. Encoding is performing now.
3.After completing of encoding, unit will stop playback automatically.
Remarks:
The recording speed is 1:1 and according to the actual plying time of the
cd track.
The system will creat a RECORD folder and then store the encoding
track in it.
The recording format is preset at mp3 bit rate: 128 kbps, sampling rate:
44.1khz.
No song title will be recorded during encoding mode.
To interrupt the recroding, press the record button again during record
mode.
Recording will be completed only entire song being encoded, if terminate
the encoding process intermediately, there is no track being recorded nor
stored to the usb.
Copying of MP3/WMA file
If putting a mp3/wma disc instead of a cd-disc, the system will copy the fi-
les to the usb or sd card if press the record button (9). The operation
procedures is same as cd encoding as stipulate on above, and the system
will switch to copying mode only if mp3/wma file being read.
PHONO ENCODING
1.Insert the USB device.
2.Press the function button to phono “.
3.Start playback at phono for the track which you want to record to usb.
4.Press the RECORD button two times to start encoding.
5.The display show REC.
12


Need help? Post your question in this forum.

Forumrules
1

Forum

roadstar-hif-1893tumpk

Reset search

  • How can i record from a CD on to an audio memory stick please Submitted on 28-7-2020 at 17:12

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar HIF-1893TUMPK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar HIF-1893TUMPK in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info