647865

Roadstar HIF-1690BT Manual

8
Zoom out
Zoom in
Previous page
1/44
Next page
3 English
CONNECTING TO POWER
Before switching on make sure that the voltage of your electricity supply is the
same as that indicated on the rating plate.
For your own safety read the following instructions carefully before attempting to
connect this unit to the mains.
1. Turn the VOLUME KNOB (12) to turn the unit ON. When no sound is produ-
ced, the unit will switch OFF automatically after 15 minutes.
2. Press PLAY / PAUSE BUTTON (2) again to resume the playback.
MAINS (AC) OPERATION
This unit is designed to operate on AC 230V 50Hz current only. Connecting it to
other power sources may damage the unit.
Caution: to prevent electric shock disconnect from the mains before remo-
ving cover. No user serviceable parts inside. Refer servicing to qualified service
personnel. Remove the stereo carefully from the box, retaining the packaging for
future use. Connect the plug to a mains power inlet 230V AC ~ 50 Hz.
RADIO OPERATION
ANTENNA
For FM reception there is a built-in pig-tail FM antenna (28) at the rear of the unit.
Extend the antenna and move around to obtain the best reception signal.
Operation
1. Turn VOLUME KNOB (12) to switch the unit on.
2. Select between AM and FM by pressing (36)/(37).
3. Tune to the desired radio station by turning the TUNING KNOB (21).
TURNTABLE OPERATION
VERY IMPORTANT!
To prevent damages from transportation, a transit screw is located at the upper
right side of the turntable platform. Before start playing, use a screwdriver and
turn the transit screw in clockwise direction (screw going down) completely. In ca-
se of transportation, remember to clock again this screw in counter-clockwise di-
rection to prevent damages.
Preparation
1. Open the Record Player Cover.
2. Release the Tonearm Clamp, and remove the stylus protector.
Listening to Records
1. Press PHONO (7).
2. Place a record on the turntable, over the central spindle. Place the EP adapter
over the central spindle when playing 17cm EP records.
3. Set the Speed Selector (24) to 33/78 or 45 rpm according to the record.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar HIF-1690BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar HIF-1690BT in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info