471678
20
Zoom out
Zoom in
Previous page
1/26
Next page
Español Español
FUENTES ALIMENTACIÓN
Este aparato funciona con una fuente de alimentación de 230V-
50Hz. Conectar el cable alimentación CA a la toma de corriente CA
doméstica. Asegurarse de que el voltaje sea igual a aquel indicado
en la placa de los datos característicos colocada en la parte posterior
del aparato.
Baterías de Reserva de Protección contra una Avería Eléctrica
La radio posee un circuito de baterías de reserva que mantiene el
horario correcto y los ajustes del despertador si se verifica una
interrupción momentánea de la corriente eléctrica.
Instalar una batería de 9 voltios (tipo 6F 22/006P), no incluida, en el
compartimento batería colocado en la parte baja del aparato.
Nota: Recomendamos el uso de una batería alcalina porqué poseen
una mayor durada. Cambiar la batería cada 9-12 meses para
obtener mejores resultados y evitar posibles pérdidas de ácido
de las baterías.
Si la corriente eléctrica se interrumpe momentáneamente la pantalla
parpadeará y la radio no funcionará. Sin embargo, el circuito de
baterías
de reserva continuará a mantener los ajustes del horario y del
despertador. Cuando se restablecerá la corriente eléctrica, el reloj
visualizará el horario correcto y el ajuste del despertador, y no será
necesario efectuar ulteriores ajustes.
Nota: Si la alimentación se interrumpe y no hay alguna batería en el
compartimento o la misma está descargada. El horario y los
ajustes del despertador se perderán. Cuando se restablecerá la
corriente eléctrica el reloj iniciará a parpadear indicando que
el horario y los ajustes del despertador tendrán que ser
corregidos.
AJUSTE DEL HORARIO CORRECTO
1. Pulsar y mantener pulsado el botón AJUSTE HORARIO (1).
2. Pulsar el botón HORA (5) para avanzar la horas.
3. Pulsar el botón MINUTO (6) hasta cuando el horario correcto se
visualice sobre la pantalla. Su radio despertador usa un reloj de
24 horas.
4. Soltar el botón AJUSTE HORARIO (1).
AJUSTE DEL HORARIO DEL DESPERTADOR
1. Colocar el Selector FUNCIÓN (9) en la posición STANDBY.
2. Ajustar el horario del despertador siguiendo el siguiente
procedimiento:
3. Mantener pulsado el botón AJUSTE DESPERTADOR (4).
4. Pulsar el botón HORA (5) para avanzar la horas, pulsar el botón
MINUTO (6) hasta cuando el horario del despertador deseado se
visualice sobre la pantalla. Su radio despertador usa un reloj de
24 horas.
5. Soltar el botón AJUSTE DESPERTADOR (4).
6. Para controlar si el horario del despertador ha sido ajustado,
pulsar el botón AJUSTE DESPERTADOR (4).
35 36
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-2750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-2750 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info