592293
5
Zoom out
Zoom in
Previous page
1/20
Next page
English English 5 6
TIME PROJECTOR
Time projector could be adjusted by scrolling the FOCUS & IMAGE ROTATION.
Scroll the FOCUS (14) for tuning the clear time projection image. Scroll the IMA-
GE ROTATING (13) for tuning the best time projection angle.
SNOOZE FUNCTION
When the alarm sounds, pressing the SNOOZE Button (2) will temporary stop
about 9 minutes then the alarm sounds again.
SLEEP FUNCTION
This function enables you to go to sleep listening to the Radio.
1. Press the SLEEP Button (2). The clock display will show 90 minutes. The
Radio turns on and will turn off automatically after 90 minutes.
2. To select a shorter time press the SLEEP Button (2) while holding until the
desired sleep time is displayed.
3. To turn off the Radio at any time during the Sleep period, press the SNOO-
ZE Button (2).
CARE AND MAINTENANCE
To prevent fire or shock hazard, do not allow this clock radio to be exposed to
rain or moisture.
This clock radio should not be exposed to direct sunlight, very high or low tem-
perature, moisture, vibration, or placed in a dusty environment. Do not use abra-
sives, benzine, thinners, or other solvents to clean the surfaces of the clock ra-
dio. To clean it, wipe with a mild non-abrasive detergent solution on a clean soft
cloth.
Never attempt to insert wires, pins, or other objects into the venlilation holes or
openings on the clock radio.
AC POWER
For your own safety read following instructions carefully before attempting to
connect this clock radio to the mains.
This unit is designed to operate on a 230V~50Hz supply onl. Connecting it to
other power sources may damage it.
Ensure that supply corresponds to the information on the rating label on the
bottom of the unit.
RESET (RESET OPERATION)
Remove the memory Back- Up battery and cord for three minutes.
SPECIFICATIONS
FM Band: 87,5 to 108 MHz
Power Supply: 230VAC, 50 Hz
Back-up Battery: 3V CR-2032 (not included)
Specifications subject to change without notice.
This marking shown on the product or its literature, indicates that it should not be di-
sposed with other household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources. Househol d users shoul d contact ei ther the
retai l er where they purchased this product, or their local government office, for details
of where and how they can take this item for environmentally safe recycling. Business
users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-2496P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-2496P in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info