471686

Roadstar CLR-2466 Manual

5
Zoom out
Zoom in
Previous page
1/26
Next page
English English
LISTENING TO THE RADIO
1. Set the FUNCTION Selector (71) to the ON position.
2. Set the BAND Selector (11) to the desired band (FM or MW).
3. Turn the TUNING Knob (12) until the desired station is heard.
4. Adjust the VOLUME Control (2) to a comfortable listening level.
5. To turn off the radio, set the Function Selector (1) to the OFF
position.
Note: The MW band uses a built in directional serial. You may have
to rotate the clock radio for the best reception.
SNOOZE FUNCTION
When the alarm sounds, pressing the SNOOZE Button will temporary
stop about 9 minutes then the alarm sounds again.
SLEEP FUNCTION
1. This function enables you to go to sleep listening to the Radio.
2. Set the FUNCTION Selector (1) to OFF or AUTO/BUZZER.
3. Press the SLEEP Button (6). The clock display will show 59 minutes.
The Radio turns on and will turn off automatically after 59 minutes.
4. To select a shorter time press the MINUTE Button (8) while holding
the SLEEP Button (6) until the desired sloop time is displayed.
5. To turn off the Radio at any time during the Sleep period, press
the SNOOZE Button (10).
WAKE TO BUZZER ALARM
1. Set the alarm time as shown above.
2. Set the Function Selector (1) to the AUTO position.
3. Turn the VOLUME Control (2) down until you hear a click.
4. To switch off the alarm either press the ALARM SET/OFF Button
(5), or set the FUNCTION Selector (2) to the OFF position.
WAKE TO THE RADIO
1. Set the alarm time as shown above.
2. Set the FUNCTION Selector (1) to the ON position.
3. Set the Band Selector (11) to the desired radio band, and follow
the procedure in LISTENING TO THE RADIO to tune the radio to
a station.
4. Set the VOLUME Control (2) to a level you feel will wake you.
5. Set the FUNCTION Selector (1) to the AUTO/BUZZER position.
6. To switch off the alarm either press the ALARM SET/OFF Button
(5) or set the FUNCTION Selector (1) to the OFF position.
56
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-2466 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-2466 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info