592184

Roadstar CLR-2285 WD Manual

5
Zoom out
Zoom in
Previous page
1/26
Next page
English English5 6
button for 8 seconds and the OUR digits will flash. Press UP/
DOWN (4-9) to adjust the HOUR digits.
DOWN (4-9) to adjust the MINUTE digits.
4. To set the days 1-5, press ALARM 1 or ALARM 2 button Button
and the 1-5 digits will flash. Press UP/DOWN (4-9) to adjust
between 1-5 (Monday to Friday), 1-7 (whole week), 6-7
or Radio Frequency.
6. To disable the Alarm mode, during normal display mode keep
DIMMERFUNCTION
1. Press quickly the SNOOZE/SLEEP/DIMMER (2) button to
change the Display intensity.
Press again 3 seconds to go back one hour (Winter Time).
AUTOTOGGLINGBETWEENDISPLAYMODE
for 3 seconds.
FM PLL RADIO
on the radio.
3 ) Press the UP / DOWN (4-9) button to search for the station. Short
press mode is MANUAL research, press and hold that the search
mode is automatic.
4 . To save the channel, press the MEM / M + (3 ) 5 seconds to
enter the memory of the radio station , then press UP / DOWN
(4-9) to select the desired channel number where you want to
save the station.
5 . After selecting the desired channel , press the MEM / M + button
(3) to confirm the location of the memory.
6 . To recall radio stations , press the MEM / M + button (3)
sequentially until the desired channel is displayed.
SNOOZEFUNCTION
When the alarm sounds, pressing the SNOOZE Button (2) will temporary
stop about 9 minutes then the alarm sounds again.
3. To set the ALARM MINUTE, press ALARM 1 (7) or ALARM 2 (8)
button once more and the MINUTE digits will flash. Press UP/
(Saturday and Sunday) or 1-1 one day of week.
5. To set the BUZZER or RADIO Alarm Mode, press ALARM 1 (7) or
ALARM 2 (8) button one more time and the BU (Buzzer) digits
will flash. Press UP/DOWN (4-9) to adjust between BU (Buzzer)
pressed the Alarm 1 (7) or Alarm 2 (8) buttons for 5 seconds until
the symbols disappear from the display.
1 . Make sure the antenna wire (10 is completely unrolled and
extended.
2 . In normal clock mode, press the ON / OFF button (1) to switch
1. During normal clock mode, press for 3 seconds the DST (9)
button until the display advance by one hour (Summer time).
DAYLIGHT SAVINGTIME (D.S.T.)
s
equentially the Hour / Date and Year.
2. To exit from this function, press again the button (4)
1. In normal clock mode, press the button (4) for 3 seconds
until ON compare in the display. The unit show
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-2285 WD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-2285 WD in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info