592183
16
Zoom out
Zoom in
Previous page
1/20
Next page
Español Español
través del transformador incluido.. Conectar el cable alimentación DC 4,5V
a la toma de corriente de CLR-1966 y enchufe el transformador a la toma
de corriente CA doméstica. Asegurarse de que el voltaje sea igual a aquel
indicado en la placa de los datos característicos colocada en la parte
posterior del trasfrmador.
Utilice sólo el adaptador de alimentación suministrado para evitar daños
en el dispositivo.
ADVERTENCIA: No utilice la unidad con las manos mojadas!
Protección contra una Avería Eléctrica
Baterías de Reserva de Protección contra una Avería Eléctrica: La
radio posee un circuito de baterías de reserva que mantiene el horario
correcto y los ajustes del despertador si se verifica una interrupción
momentánea de la corriente eléctrica.
Instalar dos bateríe de 1.4 voltios (tipo UM 4), no incluida, en el
compartimento batería colocado en la parte baja del aparato.
Nota:Recomendamos el uso de una batería alcalina porqué poseen
una mayor durada. Cambiar le bateríe cada 9-12 meses para obtener
mejores resultados y evitar posibles pérdidas de ácido de las
baterías.
AJUSTE DEL HORARIO CORRECTO
NOTA: El ajuste del reloj sólo se puede hacer con la unidad en el modo de
espera (radio apagado).
1. Pulse dos segundos el botón Ajuste de la Hora (11).
2. Pulse el botón TUN / HR + para ajustar la hora.
3. Pulse el botón TUN / MIN - para ajustar los minutos.
4. Pulse brevemente el botón Ajuste de la Hora (11) para completar la
operación.
AJUSTE DEL HORARIO ALARMA DEL DESPERTADOR
1. Ajuste la hora de la alarma mediante el siguiente procedimiento:
2. Pulse dos segundos el botón ALARM 1/VOL - (6) o ALARM 2/VOL+ (5)
3. Pulse brevemente el botón TUN/HR (4) para ajustar la horas.
4. Pulse el botón TUN/MIN (3) para ajustar la horas.
5. Pulse el botón ALARM +/VOL- (6) o APARM 2/VOL+ (5) para seleccionar
BU (Buzzer) o radio en el activar o desactivar el tipo de alarma (cuando
está activado, el indicador "" se enciende en el lado derecho o
izquierdo de la pantalla).
6. Para desactivar la alarma, pulse el botón ALARM 1 / VOL- (6) o ALARM 2
/ VOL + (5) hasta que el 'indicador se apaga.
7. Para ver el 'horario de ajuste de alarma, pulse la ALARMA 1 / VOL-(6) o
ALARM 2 / VOL + (5) dos segundos. El hora se muestra parpadeando
en la pantalla.
ESCUCHAR LA RADIO
1. Pulse brevemente el botón ON/OFF (2) para encender la radio.
2. Presione el botón AM / FM / AUX para seleccionar la banda.
27 28
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-1966-CR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-1966-CR in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info