471597

Roadstar CDR-4230MP Manual

5
Zoom out
Zoom in
Previous page
1/26
Next page
English English
56
periods. Long exposure to high temperatures can warp the disc.
• Do not stick paper or write anything with a ballpoint pen on the label side of the disc.
CD/MP3 PLAYBACK
Loading and Unloading Compact Discs
1. Set the Function Selector (9) to the CD/MP3 Position.
2. Open the disc compartment by lifting the CD OPEN/CLOSE corner (6).
3. When the door has opened, remove a disc from its case and place it carefully in the
compartment with the label side facing up. Locate 3” discs, on the central spindle in the
compartment.
4. Close the door by pressing on the corner of the CD door.
The total number of tracks appears on the display: Playback starts.
During playback, the actual track appears.
5. Adjust the VOLUME control to your desired listening level.
6. To stop playback temporarily, press the PLAY/PAUSE (II ) button (17) once. The Play
indicator will flash on the display. Press the PLAY/PAUSE (II ) button again to resume
playback.
7. To stop playback, press the STOP (<) (19) button once.
8. To switch OFF the unit select OFF with the Function Selector (9).
Notes:
• When the CD door is accidentally opened during playback, " OP " will appear on the
display.
• Wait until the disc is fully stopped before opening the CD (2) compartment.
• This unit can play 3" (8cm) single CDs without an adaptor.
LOCATING A PARTICULAR TRACK OR POINT OF THE TRACK
1. Press the SKIP DN (9)(14) button once to go back to the beginning of the current track.
2. Press the SKIP DN button repeatedly to go back to previous tracks.
3. Press the SKIP UP (13) button repeatedly to go to next tracks.
4. Press and hold either SKIP UP or SKIP DN button to search backwards or forwards, at
high speed, a particular point of track.
Note: Low level audio will be heard during the search process to assist in locating the
correct point in the track.
REPEAT PLAYBACK WITH CD
1. Press the PLAY/PAUSE button (17).
2. To repeat the same track, press the PROG/P-MODE button (11) once. The indicator
‘REPEAT’ symbol flash on the display.
The CD will start single repeat playback until STOP button (19) is pressed. Press the
REPEAT button 3 times more to cancel single repeat. The indicator ‘REPEAT’ disappears
from the display.
3. To repeat the entire disc, press the PROG/P-MODE button (11) twice. REPEAT will
appear on the display.
Press the PROG/P-MODE button (11) button 3 times more to cancel all disc repeat. The
indicator REPEAT disappears from the display.
REPEAT PLAYBACK WITH MP3
1. Press the PLAY/PAUSE button (17).
2. To repeat the same track, press the PROG/P-MODE button (11) once. The indicator
‘REPEAT’ flash on the display.
The CD will start single repeat playback until STOP button (19) is pressed. Press the
REPEAT button 3 times more to cancel single repeat. The indicator ‘REP’ disappears
from the display.
3. To repeat the entire disc, press the PROG/P-MODE button (11) three times. REP ALL
will appear on the display.
4. Press the PROG/P-MODE button (11) button 1 time more to cancel all disc repeat. The
indicator disappears from the display.
PROGRAMMED PLAYBACK FOR CD/MP3
IN CD
1. Press the PLAY/PAUSE button (17) and after 5 seconds the STOP button (19).
2. Press the PROG/P-MODE button (11). The track number “P-01” will appear and “PROG”
will appear on the display indicating the first selection.
3. Press SKIP DN (9) or SKIP UP (:) button to select the desired track to be programmed.
The track number which will be programmed will appears on the display.
4. Press once the PROG/P-MODE button (11) to enter the track into memory. “P-02” will
appear.
5. Repeat the steps 3 and 4 to program up to 20 CD tracks or 99 MP3.
6. Press PLAY/PAUSE (II) button (10) once to start programmed playback.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CDR-4230MP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CDR-4230MP in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info