Manual Roadstar CD-825U-HP (page 6 of 38) (English, German, French, Italian, Spanish)

471721

Zoom out

Zoom in

1/38

EnglishEnglish

Warning

Use the specified amperage fuse for each lead. Use of a higher amperage fuse may

cause serious damage.

OPERATING INSTRUCTIONS

POWER ON/OFF (1) (PWR)

Insert the front panel in the unit and push Power button in order to switch on the unit. Push

PWR button newly in order to switch off the unit and push REL button (14) to release the

front panel.

Note: Never release the front panel when the unit is on. Power remains on even when car

radio is off.

SELECT (2) VOLUME UP/DOWN (3)

Rotate the VOLUME Knob (3) to control the VOLUME. To select other functions, press the

SELECT (2) button shortly until the desired functions is shown on the display. Figure 1

shows how control functions are selected using the SELECT button.

1. VOLUME (rotate knob)

2. SELECT (push down)

3. BASS

4. TREBLE

5. BALANCE

6. FADER

7. LOUDNESS ON / OFF

8. DSP (ROCK - POP - CLASS - SDP OFF)

9. DX / LOC

10. STEREO / MONO Fig. 1

3. VOLUME CONTROL

Rotate the VOLUME knob to increase or decrease the volume. This knob can be used to

adjust the BASS, TREBLE, BALANCE and FADER.

This knob also selects the possible options in RDS function.

TA SEEK/TA ALARM (2)

When press the SEL button for more than 2 seconds, it is activated as selecting mode

of these function. Turn the volume knob to select:

TA SEEK Mode or TA ALARM mode.

- TA SEEK mode:

When newly turned station does not receive TP information for 5 sec., the radio retunes

to next station which has not the same station (PI) as the last station, but has the TP

information.

In TA seek mode, the current station can be changed to the completely different station

because the unit searches TP station when the field strength of the current station is

very weak, or the current station has no TP signal.

- TA ALARM mode:

Any automatic retune mode is not activated, just can be heard Beep sound.

PI SOUND / PI MUTE

– PI SOUND

When a car cruises some special area which has different PT code with same AF.

PI sound (DIP) is heard once in a while, the DIP’s sound will be heard for less than 1

second.

– PI MUTE

Under the above same situation, a mute sound will be heard for less than 1 sec.

RETUNE L / RETUNE S

The initial time of automatic TA search or PI search mode is selected.

When PI information is not caught for retune time, the radio start to retune to next same

PI station. When same PI station does not catch 1 cyclic search, the radio goes to last

station and waits for 4-5 minute until PI code is received.

4. PRESET STATIONS (1,2,3,4,5,6)

(A) RADIO MODE:

When pressed short, these keys select a preset station directly. When pressed longer

than 1 sec., current station is stored in preset memory bank. When PTY mode is se-

lected, the PTY switch is shared as follows:

PTY music group ---- PTY speech group ---- OFF

MUSIC SPEECH

1. POP M, ROCK M 1. NEWS, AFFAIRS, INFO

2. M.O.R. M, LIGHT M 2. SPORT, EDUCATE, DRAMA

3. CLASSICS, OTHER M 3. CULTURE, SCIENCE, VARIED

4. JAZZ, COUNTRY 4. WEATHER, FINANCE, CHILDREN

5. NATION M, OLDIES 5. SOCIAL, RELIGION, PHONE IN

6. FOLK 6. TRAVEL, HOBBIES, DOCUMENT

(B) CD/MP3 PLAYER MODE:

1. PAUSE 2. INTRO 3. REPEAT 4. RANDOM

USING THE RDS FUNCTION

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CD-825U-HP in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roadstar CD-825U-HP Manual

Product: