559135

Roadstar CD-815UMP Manual

6
Zoom out
Zoom in
Previous page
1/38
Next page
EnglishEnglish
Warning
Use the specified amperage fuse for each lead. Use of a higher amperage fuse may
cause serious damage.
OPERATING INSTRUCTIONS
POWER ON/OFF (1) (PWR)
Insert the front panel in the unit and push Power button in order to switch on the unit. Push
PWR button newly in order to switch off the unit and push REL button (14) to release the
front panel.
Note: Never release the front panel when the unit is on. Power remains on even when car
radio is off.
78
4. PRESET STATIONS (1,2,3,4,5,6)
(A) RADIO MODE:
When pressed short, these keys select a preset station directly. When pressed longer
than 1 sec., current station is stored in preset memory bank. When PTY mode is se-
lected, the PTY switch is shared as follows:
PTY music group ---- PTY speech group ---- OFF
MUSIC SPEECH
1. POP M, ROCK M 1. NEWS, AFFAIRS, INFO
2. M.O.R. M, LIGHT M 2. SPORT, EDUCATE, DRAMA
3. CLASSICS, OTHER M 3. CULTURE, SCIENCE, VARIED
4. JAZZ, COUNTRY 4. WEATHER, FINANCE, CHILDREN
5. NATION M, OLDIES 5. SOCIAL, RELIGION, PHONE IN
6. FOLK 6. TRAVEL, HOBBIES, DOCUMENT
(B) CD/MP3 PLAYER MODE:
1. PAUSE 2. INTRO 3. REPEAT 4. RANDOM
1. VOLUME (rotate knob)
2. SELECT (push down)
3. BASS
4. TREBLE
5. BALANCE
6. FADER
7. LOUDNESS ON / OFF
8. DSP (ROCK - POP - CLASS - SDP OFF)
9. DX / LOC
10. STEREO / MONO
Fig. 1
SELECT (2) VOLUME UP/DOWN (3)
Rotate the VOLUME Knob (3) to control the VOLUME. To select other functions, press
theSELECT (2) button shortly until the desired functions is shown on the
display.
Figure 1shows how control functions are selected using the SELECT button. Keep
pressed the SEL Button 4 seconds to enter in the second submenu as per Fig. 2
MASK DPI (1)
When press the SEL button for more than 2 seconds, it is activated as selecting mode
ofthese function.
MASK DPI: masked only the AF which has different PI.
MASK ALL: masked the AF which has different PI and NO RDS signal with field strength.
3. VOLUME CONTROL
Rotate the VOLUME knob to increase or decrease the volume. This knob can be used to
adjust the BASS, TREBLE, BALANCE and FADER.
This knob also selects the possible options in RDS function.
PTY ON / OFF (PROGRAM TYPE) (5)
To enable or disable the Program Type function.
RETUNE L / RETUNE S (6)
The initial time of automatic TA search or PI search mode is selected.
When PI information is not caught for retune time, the radio start to retune to next
samePI station. When same PI station does not catch 1 cyclic search, the
radio goes to last
station and waits for 4-5 minute until PI code is received.
1. MASK ALL / DPI
2. PI SOUND / MUTE
3. AF ON/OFF
4. TA ON / OFF
5
. PTY ON/OFF
6 RETUNE L / S
7
.
VOLUME LAST
8
. CLOCK 12 / 24
9
. BAND
10
. SEEK 1 / 2 / 3
11.BEEP ON/OFF Fig. 2
VOL LAST/ADJUST (7)
When press the SEL button for more than 2 seconds, it is activated as selecting mode
PI SOUND / PI MUTE (2)
– PI SOUND
When a car cruises some special area which has different PT code with same AF.PI sound
(DIP) is heard once in a while, the DIP’s sound will be heard for less than 1 second.
– PI MUTE
Under the above same situation, a mute sound will be heard for less than 1 sec.
detected even user still push SEEK button.
SEEK 2: Auto SEEK SCAN is not stopped even station is detected if user push SEEK
button. When release this SEEK button, then stop when station is defected.n.
of these function. (last Volume level).
AF ON / OFF (ALTERNATIVE FREQUENCY) (3)
To enable or disable the Alternative Frequency function.
TA ON / OFF (TRAFIC ANUNCHEMENT) (4)
To enable or disable the Trafic Anounchement function.
CLOCK 12 / 24 (8)
To change the Display clock from 12 to 24 H format.
BAND (9) NOT USED ON THIS MODEL.
BEEP MODE (11)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of
these function.
2 sec.
BEEP ON: BEEP sound can be heard from speaker when the buttons are pressed.
SEEK 1 / 2 / 3.
SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped when station is
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CD-815UMP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CD-815UMP in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info