559846
5
Zoom out
Zoom in
Previous page
1/32
Next page
-E5-
4.To change the temperature, turn CONTROL KNOB to desired
setting. Turning the CONTROL KNOB clockwise will increase the
temperature. Turning the CONTROL KNOB counter-clockwise will
decrease the temperature. Temperature can be adjusted from
150°F/70°C - 42F/22C in 25° increments.
5.As the skillet heats up, the display will show the actual temperature
of the skillet as it climbs to reach the set temperature.
6.When the desired temperature has been reached, the PREHEAT
LIGHT will turn off, the READY LIGHT will turn on and the skillet will
beep three times.
NOTE: If you adjust the temperature during cooking, the PREHEAT
LIGHT will turn on. When the new temperature is reached, the
PREHEAT LIGHT will turn off and the READY LIGHT will turn on
again and the unit will beep three times.
7.Your skillet is equipped with a digital countdown timer. To switch
the display into timer mode, press the TEMP/TIMER button once. The
display will show 00:00 as the default countdown time.
8.Turn the CONTROL KNOB clockwise to select the desired time.
Turning the CONTROL KNOB counterclockwise will decrease the
time. The timer can be adjusted from zero to sixty minutes in 1
minute increments.
9.The countdown timer will start counting down 3 seconds after the
timer has been set. The timer will count down in one second
increments.
10. When the timer counts down to 00:00, the unit will beep three
times, but will continue to operate at the current temperature.
You may adjust the countdown timer during cooking in 1
minute increments. For example, if the timer reads 23:24 and
you turn the CONTROL KNOB one click clockwise, it will move
up to 24:00. It will decrease in 1 minute intervals if you turn the
knob counter-clockwise.
11. When the TIMER is used, the TIMER will be the default display. If
you wish to switch back to the temperature display, press the
TEMP/TIMER button once. To switch back to the timer display,
press the TEMP/TIMER button again.
12. To change the temperature scale from Fahrenheit and Celsius,
simply insert a pen or paper clip in the hole located on the upper
HOW TO USE YOUR ELECTRIC SKILLET (CONT.)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rival S16SG-CN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rival S16SG-CN in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info