559824
23
Zoom out
Zoom in
Previous page
1/36
Next page
4
1. No intente operar este horno con la puerta abierta, ya que la operación con puerta abierta puede resultar en la
exposición dañina a energía microonda. Es importante no frustrar o intentar forzar los cierres de seguridad.
2. No coloque ningún objeto entre la cara delantera del horno y la puerta o permi-ta que residuos de tierra o limpiador
se acumulen en las superficies de sellos.
3. No opere este horno si está dañado. Es particularmente importante que la puerta del horno se pueda cerrar
apropiadamente y que no hay daño a:
a) Puerta (doblada)
b) Bisagras o cerraduras (dañados o sueltos)
c) Sellos de la puerta y superficies de sello
4. El horno no debe ser ajustado o reparado por nadie excepto por una persona adecuadamente calificada para
prestar el servicio.
1. Asegúrese que todos los materiales sean removidos del interior de la puerta.
2. Revise el horno de cualquier daño, como un desperfecto o puerta doblada, daños en los sellos de las puertas o
superficies selladas,
3. Éste microondas debe ser ubicado en una superficie plana, estable que so-porte su peso y los alimentos más
pesados que vayan a ser cocidos en el horno.
4. No coloque el horno donde el calor, o alta humedad se generen, o cerca de materiales combustibles.
5. Para una correcta operación, el horno debe tener suficiente circulación de aire. Deje 20 cm. de espacio sobre el
horno, 10cm en la parte trasera y 5cm de am-bos lados. No cubra no bloquee ninguna de las aberturas del
electrodoméstico No remueva la base en las cuales el horno permanece.
6. No opere el horno sin la bandeja de vidrio, y el soporte girador, y jelas en sus propias posiciones.
7. Asegúrese de que el cordón proveedor de energía no este dañado y no pase por debajo del horno o sobre ninguna
superficie caliente o filosa.
8. El toma corriente debe estar listo a la accesibilidad esto harácil poder desco-nectar el horno en alguna
emergencia.
GUÍA DE INSTALACIÓN
PRECAUCIONES PARA EVITAR UNA POSIBLE EXPOSICIÓN
EXCESIVA A LA ENERGÍA MICROONDAS
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rival RGTM702 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rival RGTM702 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info