Manual Ritter solida 4 (page 15 of 62) (English, German, Dutch, French, Italian, Polish, Spanish, Norwegian)

544558

Zoom out

Zoom in

1/62

Unfold the illustrations at the

front and back of this manual.

Please read these instructions

thoroughly before you start to

use the appliance. Keep these

operating instructions in a safe

place and ensure that they are

included with the appliance if

passing it on to a third party.

Alternatively, these operating

instructions are available at

www.ritterwerk.de.

INTENDED USE

The multi slicer is used for the

slicing of household foods.

If the appliance is used for a

purpose other than this, or if it

is operated incorrectly, severe

injuries may occur or the

appliance may be damaged.

All warranty and liability claims

will be rendered null and void in

this case.

INITIAL START-UP

Preparation

Remove the appliance carefully

from the packaging. Remove

all packaging parts and keep

these together with the packag-

ing in a safe place. Clean the

appliance before allowing it to

come into contact with any food

(see CLEANING).

Setting up the appliance

• Set the appliance down on a

at, non-skid surface close to a

mains socket.

solida

Slide the slice carriage (3)

into the guide grooves on the

appliance.

solida

Using a small amount of force,

push the slice carriage (3)

vertically into the guide groove

on the appliance until it audibly

locks into place.

Slide the left-over holder (2)

onto the slice carriage's handle.

Unwind the mains cable (8)

to the length required from the

cable compartment (9) under

the appliance and insert the

mains plug into the socket.

SLICING

Use the slice thickness

adjustment knob (12) to set the

required thickness.

Note:

The slice thickness adjustment

scale is not a millimetre scale.

For safety reasons, the "0"

position is designed to cover

the blade.

Place the food to be sliced

onto the slice carriage (3). Use

the left-over holder (2) to press

it up against the stop plate (1).

Protect your hands, by

always using the slice carriage

and, where applicable, the left-

over holder. Exception: Exces-

sively large foods to be sliced.

• Switch the appliance on

using the rocker switch (7). Two

operating modes are available:

Temporary operation (Posi-

tion II):

The rotary blade (13) runs as

long as the switch is pressed

and held down in this position.

Continuous operation (Posi-

tion I):

The rotary blade runs without

the switch being pressed and

held down until you move the

switch to the "0" position.

Note:

Never use the appliance for

more than a maximum of

5 minutes in continuous opera-

tion.

• With the appliance running,

gently feed the food to be sliced

into the path of the rotary blade.

• When nished slicing, wait

until the rotary blade has come

to a complete stop.

• After each use, turn the slice

thickness adjustment knob

to the "0" position, in order to

cover up the sharp rotating

blade and to avoid any injuries.

CLEANING

Caution:

Switch the appliance off

before cleaning it; pull the

mains plug out off the socket

and turn the slice thickness

adjustment knob (12) to the

"0" position.

Clean the multi slicer regularly

to prevent the accumulation of

food residue. The rotary blade

must also be cleaned regularly

as described below to prevent

its surface from rusting.

Note:

Over time, an accumulation of

food residue may cause dam-

age to the surface of the rotary

blade, causing it to rust.

Preparation

• Remove the slice tray (11)

and the left-over holder (2).

solida

Press the release button (4)

and pull the slice carriage (3)

off the appliance.

solida

Pull the slice carriage (3) for-

ward and then lift it up and out

of the guide groove.

Removing the rotary blade:

Remove the blade

guard (6).

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ritter solida 4 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish, Norwegian as an attachment in your email.

The manual is 1,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ritter solida 4 Manual

Product: