544570
15
Zoom out
Zoom in
Previous page
1/84
Next page
13
English
Close the lid.
Note:
The lid must be closed
tightly to prevent water
evaporation, which could
cause the appliance to boil
dry.
Heating water
Press the required tem-
perature button (4.1 - 4.4)
on the base (2) to switch
the kettle on. The LED on
the active temperature but-
ton starts to ash and the
kettle heats the water.
CAUTION: Risk of burns:
Never open the lid of the
jug while the kettle is in
the process of heating
water, as hot water may
splash out.
When the kettle is
heating water, the outer
surface of the jug may
get very hot. Always use
the handle to hold the
kettle.
Once the target tempera-
ture is reached, the LED
stops ashing and the kettle
switches off automatically.
Note:
To ensure that heat is dis-
tributed evenly through the
water in the jug, the kettle
automatically switches off
and back on again sev-
eral times between 70°C
and 95°C. A slight clicking
sound can be heard as this
happens.
Switching the appliance
off
Manually:
Press the active tempera-
ture button. The LED stops
ashing and the kettle stops
heating the water.
Automatically:
The kettle switches off auto-
matically in the following
situations:
if the jug is removed from
the base
when the target tempera-
ture is reached (overheat-
ing protection)
if there is not enough
water in the jug (boil-dry
protection)
Note:
Overheating protection and
boil-dry protection only work
if the jug lid is closed.
Adjusting the temperature
You can adjust the target
temperature while the kettle
is in the process of heating
water.
Press the required tem-
perature button (4.1 - 4.4).
The LED on the active
temperature button starts
to ash and the kettle heats
the water until the newly
selected target temperature
is reached.
Note:
If you select a lower tem-
perature, the water may
need to cool down. In this
case, the process may take
longer.
Boil-dry protection
If the jug is empty or not
lled up to the minimum
ll level when the kettle is
switched on, all four LEDs
will ash and the kettle will
immediately switch off auto-
matically. Follow the steps
below to ensure that the
kettle is ready for use again:
Allow the kettle to cool
down for a few minutes.
Fill the jug (3) with clear
water.
Note the minimum and
maximum water levels
(marked with "min." and
"max." on the water level
indicator (5)).
Press the required tem-
perature button (4.1 - 4.4).
The LED on the active
temperature button starts
to ash and the kettle heats
the water.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ritter fontana 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ritter fontana 5 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish, Norwegian as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info