Manual Ritter ET 10 (page 89 of 101) (English, German, Dutch, French, Italian, Polish, Spanish, Norwegian)

544785

Zoom out

Zoom in

1/101

Unfold the illustrations (K to M)

at the back of this manual.

SAFETY INSTRUCTIONS

To avoid personal injury or

damage to the appliance,

please observe the following

safety instructions:

– This appliance may only

be assembled by qualied

personnel. ritterwerk will not

be held liable for the conse-

quences of improper and/or

incorrect assembly.

– The mains cable must be

positioned to ensure that

the appliance can be fully

folded down into the drawer

without trapping the cable.

The mains cable must be

routed directly and without

obstruction from the built-in

toaster system to the socket,

which must be mounted in

the oor unit.

– Unplug the cable from the

socket before assembly.

INSTALLATION

CONDITIONS

The following dimensions rep-

resent minimum values:

– Body width: 300 mm

– Clearance height for drawer

base/crossbeam: 75 mm

– Pullout clearance for front

edge of worktop/inner

edge of front drawer panel:

415 mm

– Clearance width (usable) for

drawer base: 184 mm

– Width of appliance (when

folded down): 178 mm

The drawer base should be at

least 16 mm thick.

At a nominal length of 500 mm,

the drawer's roller mechanism

should have a static load ca-

pacity of at least 40 kg.

For body widths exceeding

300 mm, it is possible to devi-

ate from the minimum lateral

distance of 53 mm and centre

the toaster laterally within the

drawer.

SELECTING A SOCKET

Note:

A Schuko (type F) socket

must be positioned at

drawer level on or behind the

drawer's rear panel.

The mains cable connection

to the socket should be routed

under the rear crossbeam or

the underside of the work top

and as high up as possible in

the corner of the oor cabinet's

rear panel.

It must be possible to slide the

drawer in fully while the mains

plug is in the socket.

The mains plug must be eas-

ily accessible to the user to

ensure that the appliance can

be unplugged from the mains

as required (for example, prior

to cleaning).

MOUNTING THE TOASTER

• Pull out the drawer until it

stops.

Place the drill template in

the drawer as shown in the

illustrations.

• Mark the positions for the six

drillholes required.

• Use a 1 mm drill to pre-drill

the marked positions.

Use the six countersunk

screws provided (four 3 x 16,

two 4 x 13; for a drawer base

of 16 mm) to mount the holding

xtures.

• Mount the toaster in the

drawer as described in the

operating instructions.

English

ASSEMBLY INSTRUCTIONS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ritter ET 10 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish, Norwegian as an attachment in your email.

The manual is 1,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ritter ET 10 Manual

Product: