Manual Ritter AES 72 SR (page 18 of 75) (English, German, Dutch, French, Italian, Polish, Spanish, Norwegian)

544554

Zoom out

Zoom in

1/75

Preparation

• Removing the slice car-

riage (11).

Pull the slice carriage for-

wards up to the rst stop. Raise

it slightly and then pull it over the

rst stop and on to the second

one. Raise it again and then pull

it completely off the appliance.

Removing the rotary blade:

• Fold the blade catch (13)

upwards, turn it clockwise, and

remove it.

• Take hold of the rotary blade at

its rotational centre and remove

it.

Cleaning after each use

• Wipe down the housing and

all removed parts, including the

rotary blade, with a damp cloth.

Occasional cleaning

• Give all removed parts, includ-

ing the rotary blade, a thorough

wash in warm soapy water (not in

the dishwasher!).

• Clean the housing behind the

blade using a dry cloth/brush.

Note:

Do not use any abrasive cleans-

ers, sponges with rough surfaces

or hard brushes to clean the

appliance.

• Dry all parts that you have

washed.

• Grease the rotary blade's gear

wheel with a little Vaseline.

• Fit the rotary blade back into

the appliance.

MAINTENANCE

Your multi slicer is maintenance-

free. However, we recommend

that you occasionally apply a little

Vaseline to the rails for the slice

carriage to keep them lubricated

and ensure that the carriage

continues to move easily.

STORAGE

Remove the nger protec-

tor (9) and left-over holder (10)

and hang them both onto the

retaining brackets (7) and (8).

• Make sure that the slice thick-

ness adjustment knob (4) is set

to position "0", as otherwise the

appliance cannot be folded down

for safety reasons.

Hold the appliance at the stop

plate (3) and use the other hand

to press the folding up feature

release button (6).

• Swivel the appliance until it is

located fully in the drawer.

Note:

The slice carriage (11) and slice

tray (5) can be left on the appli-

ance.

DISPOSAL

At the end of its service

life this product may not

be disposed of as part of

normal domestic waste.

It must be taken to a dedicated

collection point for recycling

electrical and electronic devices.

This is referred to by the symbol

on the product, the operating

instructions or the packaging.

The materials can be used

again in accordance with their

identication. The reusage,

material-sensitive recycling or

other forms of recycling of old

appliances enables you to make

a vital contribution to protecting

our environment.

Please consult with the disposal

ofce at your local authority.

REACh DIRECTIVE

See www.ritterwerk.de

SPECIAL ACCESSORIES

A non-toothed rotary blade is also

available specically for sliced

meat, sausage and ham.

SERVICE, REPAIRS AND

SPARE PARTS

Please contact your local after-

sales service for all service,

repairs and spare parts matters!

See www.ritterwerk.de

TECHNICAL DATA

This appliance complies with the

following regulations and direc-

tives:

– 2004/108/EC

– 2006/95/EC

– 1935/2004/EC

– EuP 2009/125/EC

The appliance thus complies with

the CE specications.

Mains voltage: 230 V~

Power consumption:

Refer to the type label on the

underside of the appliance.

Slice thickness:

0 mm to approx. 14 mm

WARRANTY

This ritter appliance comes with

a two-year manufacturer’s war-

ranty, starting with the date of

purchase and in accordance with

the EU warranty directives. In

the event of a warranty claim or

for servicing, the appliance must

always be sent to the appropriate

national customer service centre.

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ritter AES 72 SR in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish, Norwegian as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ritter AES 72 SR Manual

Product: