Manual RISCO Group RVCM11H - VUpoint Cube IP-Kamera (page 20 of 24) (English)

580181

Zoom out

Zoom in

1/24

2. Navigate to the Advanced Setup > Port Forwarding/Port Triggering. The

Port Forwarding page is displayed.

Figure 21 Port Forwarding page (empty)

NOTE: This is the section in the router where we will specify which local IP

address belongs to which external port number. Make sure that “Port

forwarding” is enabled for each IP address.

3. For the first camera enter the settings as shown in the screenshot below.

Remember to use the same local IP address and external port numbers as

was set in the camera settings in Step 2.

Figure 22 Port Forwarding page (populated)

NOTE: For HTTP, RTSP and HTTPs Port settings use the TCP Protocol option.

4. Click Apply/Save Settings to save the changes.

5. Reboot the camera by unplugging and reconnecting the camera to the

power supply.

6. Repeat the above steps for each camera using the same local IP address

and external port numbers as was set in the camera settings.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RISCO Group RVCM11H - VUpoint Cube IP-Kamera in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of RISCO Group RVCM11H - VUpoint Cube IP-Kamera

RISCO Group RVCM11H - VUpoint Cube IP-Kamera Installation Guide - German - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RISCO Group RVCM11H - VUpoint Cube IP-Kamera Manual

Product: