774035
17
Zoom out
Zoom in
Previous page
1/28
Next page
user guide
This product MUST be used responsibly
Read all instructions thoroughly before
use and retain for future reference
www.riobeauty.com
Rio, Dezac and IPLPRO are trademarks of The Dezac Group Ltd
© The Dezac Group Ltd 2012 Manufactured by The Dezac Group Ltd, PO Box 17, Cheltenham, England GL53 7ET
1-IN-IPHR2-UK/1.2
IPLPRO
HAIR REMOVER
© The Dezac Group
© The Dezac Group
© The Dezac Group
1IPLPRO
•Read all instructions thoroughly
and retain for future reference.
•Thisappliancecanbeusedbychildren
aged8yearsandaboveandpersons
with reduced physical, sensory
or mental capabilities or lack of
experienceandknowledgeiftheyhave
beengivensupervisionorinstruction
concerningtheuseoftheappliance
in a safe way and understand the
hazardsinvolved.Childrenshallnot
playwiththeappliance.Cleaningand
maintenance shall not be made by
childrenwithoutsupervision.
•Neveraimthewandatorneareyes.
Reflection Hazard: Please remove
all jewellery in the vicinity of the
treatmentareabeforeuse.
•DoNOTusenearflammablematerials.
•Do NOT use this appliance in wet
surroundings(nearabathorshower).
•DoNOTuseifwaterenterstheunit.
•DoNOTimmerseinwater.
WARNINGS
1-IN-IPHR2-UK/1.2
© The Dezac Group
© The Dezac Group
© The Dezac Group
2
IPLPRO
Unsuitable skin tones and hair
types:
•IPLisnotsuitablefordarkskintones,
forexample,thoseofAfro-Caribbean,
Black African, Indian or Pakistani
descent.See“SuitableSkinTypes”
andalwayscarryoutPatchTest.
•IPLisnotsuitablefortheremovalof
red,lightblonde,greyorwhitehair.
Areas not to treat:
•DoNOTtreatovertattoos,permanent
make-up, pimples, acne, warts,
hair on black spots or moles, dark
freckles, skin disease, birth marks,
burns,nipples,genitaloranalareas,
varicoseveins,eczema,coldsores,
psoriasis,openwounds,onabnormal
skinpigmentationsuchasalbinism
andvitiligooronbrokenskin.
WARNINGS
© The Dezac Group
© The Dezac Group
© The Dezac Group
3IPLPRO
Do not use if:
•Youarepregnantorbreastfeeding,
you have a history of epilepsy or
are taking medication known to
increase photosensitivity. If you
haveanyhistoryofepilepticseizures
we do NOT recommend using IPL.
Common medications can cause
photosensitivity so if you are on
any medication you should check
for photosensitivity warnings and
ifinanydoubtconsultyourdoctor.
Common medications which can
causephotosensitivityincludesome
diuretics,someantibiotics,tricyclic
antidepressants and medications
prescribed for thyroid conditions,
lupusandarthritis.
•DoNOTuseifyouhaveahistoryof
skincancer.
•Do NOT use if you have diabetes,
kidney disease, heart disease or
thyroidproblems.
•DoNOTtreatthesamearearepeatedly
inanyonesession.
WARNINGS
© The Dezac Group
© The Dezac Group
© The Dezac Group
4
IPLPRO
Possible reactions:
•Mostpeoplefeelaheatingsensation
during treatment. Some people
experienceaslightreddeningofthe
skin.Inmostcasesthiswilldisappear
within24hours,butonrareoccasions
itmaytakeupto72hours.
The following effects will
require discontinuing treatment.
In each case, cool the area - we
recommendanaloeveracoolinggel.
Ifsymptomscontinueafter48hours,
seekmedicaladvice.
•Painintheareatreated
•Itchingintheareatreated
•Redness
If blistering or burning occurs, seek
medicaladviceimmediately.
WARNINGS
© The Dezac Group
© The Dezac Group
© The Dezac Group
5IPLPRO
INTRODUCTION
The IPLPROTM hair remover uses Intense Pulsed Light technology to give
long-term hair removal.
Placed gently against the skin, pulses of intense light are delivered directly to
the hair follicle with enough energy to disable the hair root without affecting the
surrounding area.
IPLPROTM is ideal for fast and efficient long term hair removal, for use on the legs,
arms, underarms, bikini line, back, chest and certain areas of the face.
© The Dezac Group
© The Dezac Group
© The Dezac Group
6
IPLPRO
1 Enable button
2 Power level indicators
3 Mains power socket (on the back)
4 Keyswitch
5 Bulb life indicator
6 Wand
7 Power level increase button (+)
8 Power level decrease button (-)
9 Wand cable
1
4
8
7
6
9
3
2
5
© The Dezac Group
© The Dezac Group
© The Dezac Group
7IPLPRO
0 IPL treatment button
! Blue ‘ready’ light (x2)
@ Treatment cartridge
£ Indentation mark
$ Orange ‘safety’ light (x2)
% Orange IPL aperture
^ Skin sensors (x4)
& Bulb
* Mains power lead
( Keys
*
(
^
£
&
@
%
0
!
$
© The Dezac Group
© The Dezac Group
© The Dezac Group
8
IPLPRO
SUITABLE SKIN TYPES
Your IPLPRO hair remover is suitable for fair coloured skin through to olive and tanned skin types. For treatment to be
effective the hair needs to be darker than the surrounding skin. Best results are on pale skin with dark hair.
You may find that different power levels are required on different areas. Each area should be tested for the appropriate
maximum power level.
Use the skin tone chart together with the chart (page 8) to accurately identify your skin tone/type.
SKIN TONE CHART
Suitable for
IPL treatment
NOT Suitable
for IPL treatment
© The Dezac Group
© The Dezac Group
© The Dezac Group
9IPLPRO
TREATMENT SUMMARY
Read all
warnings
before you
begin
Establish
skin tone
using the
chart
Carry out
a patch test
Wait
24 hours
Did your
skin react
to the
patch test?
See
‘possible
reactions’
under
‘warnings’
See
‘possible
reactions’
under
‘warnings’
TREATMENT
YES YES
NO
NO
Do NOT
use the
EVOLUTION
unit unless
the problem
is resolved
Did your
skin react
to the
treatment?
© The Dezac Group
© The Dezac Group
© The Dezac Group
10
IPLPRO
24 hours before treatment check for any reaction by testing a
small area.
The patch test will confirm the maximum power level for your
skin type.
Treat an area on each power level (e.g. arm, leg) up to the
maximum power level for your skin type (see Skin Chart). Use
the (+) button to increase the power level by a single step
each time and work your way along the area with the wand on
a different part of the skin each time.
If you feel any discomfort the previous power level is the
maximum power level you should use.
A slight redness may occur, but not always, within an hour
of treatment. However, if any redness remains after 24 hours
this would indicate the power level selected was too high for
your skin type.
IMPORTANT: Because skin colour varies on different areas
of the body, you may find that you need different power level
settings for different areas. Each area should be tested for the
appropriate maximum power level.
PATCH TEST SKIN CHART
Skin
Type Skin Colour
Tanning
History
Maximum
Power Level
IVery fair,
“transparent
Always burns,
never tans
Subject to patch test
all 5 power levels
can be used
II Fair Always burns
III Fair to light
olive Burns mildly
Subject to patch test
power levels 1, 2
and 3 can be used
IV Olive/Tanned Rarely burns,
tans with ease
VDark brown Very rarely burns
NOT suitable
for IPL treatment
VI Black Never burns
12345
123
12345
123
© The Dezac Group
© The Dezac Group
© The Dezac Group
11 IPLPRO
Please ensure you read and understand the ‘Warnings’ section before proceeding.
• Donotuseanyhairremovalmethodthatplucksthehairfromthefollicle,asthisrendersIPLineffective.
• Removealljewelleryinthevicinityofthetreatmentarea.
• Ensureyouhavepatchtestedtheareatobetreated24hourspriortotreatmentandareawareofyourmaximum
power level.
• Your first treatment will always be on power level 1 and can only be increased by one level after a treatment is
performed.
BEFORE YOU START
INCREASINGTHEPOWERLEVEL
Each time you use your IPLPRO you will need to do a treatment flash on each power level before you can increase
the power to the next level. This is a safety feature to ensure you are aware of the treatment intensity at each level.
Aself-checklastingafewsecondsisperformedwheneverthepowerlevelisincreased.Duringthistime,thepower
levels will illuminate up and down. These self-checks may occur at other times and are important to optimise the
performance of the unit.
© The Dezac Group
© The Dezac Group
© The Dezac Group
12
IPLPRO
STEP 1
Shave the area to be treated. This
ensures that the light energy goes
directly to the hair root and avoids hair
burning on the surface.
STEP 2
Connect mains power lead into the
power socket on the back of the unit
and plug into the mains.
STEP 3
Turn the key clockwise to the ON
position to unlock. The light around the
keyswitch will flash green. Power level
1 will illuminate and the fan will startup.
IPLPRO
3
1
2
INSTRUCTIONS FOR USE
© The Dezac Group
© The Dezac Group
© The Dezac Group
13 IPLPRO
STEP 4
Enter the security code by pressing the buttons (highlighted in black) in the following order:
The unit will emit 2 beeps and the keyswitch will stop flashing and illuminate green. A series of self-checks
will be performed. During this time, the power levels will illuminate up and down. When completed, the
lowest power level will illuminate and the enable button will flash blue ready for selection.
Note: The unit will power off if the code is incorrectly entered (the keyswitch will change from flashing green to flashing
orange and the unit will emit two low beeps). Turn the key off, wait a few seconds and then turn the key back on and enter
the correct security code.
INSTRUCTIONS FOR USE
IPLPRO
IPLPRO
IPLPRO
IPLPRO
IPLPRO
4
© The Dezac Group
© The Dezac Group
© The Dezac Group
14
IPLPRO
STEP 5
Press the enable button once.
The enable button will stop flashing.
The orange lights on the wand will
illuminate.
Note: Each time the power setting is
adjusted, you will need to press the
enable button to continue.
STEP 6
Place the wand over the area you wish
to treat. Ensure all 4 skin sensors are in
contact with the skin (you may need to
apply gentle pressure). The blue ‘ready’
lights will illuminate.
STEP 7
Press and HOLD the treatment button
on the wand. This initiates the treatment
flash. You may feel a slight warming of
the area.
Notes:
• DoNOTmovethewandduring
treatment.
• Thewandmaybecomewarmduring
use which is quite normal.
• If contact is lost between the skin
sensors and skin during treatment,
the wand’s blue lights will go off.
Return to step 6.
INSTRUCTIONS FOR USE
IPLPRO
5
6
7
© The Dezac Group
© The Dezac Group
© The Dezac Group
15 IPLPRO
STEP 8
The blue lights will go out after the
treatment flash. The unit will also self-
check after each flash. This takes five
seconds, during this time the power
level lights will illuminate up and down.
When moving the wand to the next
area, the skin sensors must be lifted off
the skin.
If you are increasing power for the next
treatment, press the (+) button and
return to step 5.
Important: Do NOT exceed the
maximum power level for your skin type.
AFTER USE
Turn the key anticlockwise to the OFF
position to lock. Remove and store the
key in a safe place away from children.
INCREASINGTHEPOWERLEVEL
Eachtime youuse yourIPL youwill needto doa
treatment flash on each power level before you can
increase the power to the next level. This is a safety
feature to ensure you are aware of the treatment
intensity at each level.
A self-check lasting a few seconds is performed
whenever the power level is increased. During this
time,thepowerlevelswillilluminateupanddown.
8
INSTRUCTIONS FOR USE
IPLPRO
IPLPRO
© The Dezac Group
© The Dezac Group
© The Dezac Group
16
IPLPRO
‘MUTE’ OPTION
To turn off the audio indications (beeps),
press down the enable button while turning
on the unit with the key.
Note: This doesn’t turn off warning beeps.
Turn the key off and back on to turn audio
indications back on.
WAND CABLE STORAGE
Wrap the wand cable around
the cable storage feature on the
underside of the unit and place
the wand back in the wand recess.
If any of the above problems persist or the power
level lights continue to flash, please contact our
Customer Care Department or check the website:
www.rio-ipl.com for more information.
IPLPRO
IPLPRO
ERROR CODES
Indication Problem / Solution
OVERHEAT PROTECTION
Unit should be left on
(cooling fans will run).
Leave wand on a hard surface
(NOT on its side or
on the console).
WAND FAN ERROR
Turn off using keyswitch,
wait 5 seconds and
turn on again.
ENERGY SAVING MODE
Turn off using keyswitch,
wait 5 seconds and
turn on again.
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
All lights are off
© The Dezac Group
© The Dezac Group
© The Dezac Group
17 IPLPRO
TREATMENT AREA
As a guide to the treatment area, a small indentation mark
will be left by pressing the wand down on the skin. When
moving the wand use these marks, building up a grid-like
pattern to ensure complete coverage.
A white eyeliner pencil may also help by outlining areas to
be treated.
Important: Do NOT use a dark eyeliner or felt pen to mark
an area as this will react with the treatment flash and cause
damage to the skin.
Indentation marks building up a grid-like pattern
1432
8765
FACIAL TREATMENT
The IPLPRO can be safely used on the face within the area
illustrated by the white dotted line.
Important: It should not be used around the eyes or on the lips.
© The Dezac Group
© The Dezac Group
© The Dezac Group
18
IPLPRO
The IPLPRO hair remover incorporates a treatment
cartridge containing a high performance quartz bulb.
Depending on a number of factors (including room
temperature, output level selected, speed of repeat
flashes) the cartridge can give +40,000 treatment flashes.
The performance of the bulb is checked after each
treatment.
When there are 300 treatments
remaining, the bulb life indicator
flashes yellow.
When the yellow light changes to
flashing red, the bulb must be changed.
STEP 1
Turn the unit off and back on, and enter
security code.
STEP 2
Press and hold the (-) and (+) buttons
together while the unit is self-checking.
Power levels 1 and 5 will illuminate.
CHANGING THE TREATMENT CARTRIDGE
IPLPRO
IPLPRO
IPLPRO
2
IPLPRO
1
© The Dezac Group
© The Dezac Group
© The Dezac Group
19 IPLPRO
STEP 3
Pull the treatment cartridge (which
contains the bulb) away from the wand.
The unit will automatically power off.
STEP 4
Ensure the connecting pins line up with
the holes in the wand and push the new
treatment cartridge fully into place.
The unit will automatically power on.
Power levels 1 and 5 will illuminate
again.
STEP 5
Press and hold the (-) and (+) buttons
together. The bulb indicator light and
power level 5 light will go out.
The enable button will flash blue
indicating the unit is ready for further
treatments.
Note: The unit will not power on if the
bulb is fitted incorrectly or is missing.
Further treatment cartridges can be
ordered using the accessory form or by
calling the Rio careline.
3
CHANGING THE TREATMENT CARTRIDGE
4
IPLPRO
5
© The Dezac Group
© The Dezac Group
© The Dezac Group
20
IPLPRO
THE HAIR GROWTH CYCLE
© The Dezac Group
© The Dezac Group
© The Dezac Group
21 IPLPRO
Everyone’s hair grows differently, depending on age, weight,
metabolism, hormones, ethnicity, medications and other
factors. However, all hair goes through three distinct growth
phases:
Active Growth phase (called the anagen phase),
Degradation phase (catagen phase), during which the hair
stops growing but is not yet shed, and the Resting phase
(telogen phase), when a hair falls out and a new hair begins
to form.
IPL treatment is effective when the hair is in the active growth
phase. At any one time there is only a percentage of hairs in the
Active Growth phase (the actual percentage varies from one
body area to another). Some follicles are destroyed, others may
be reduced to producing only vellus hairs (light fine hairs) and
some are disabled helping prevent hair regrowth.
To catch all hairs in the Active growth phase several treatments
are required over many months (a minimum of six over six
months). Thereafter a quick treatment every 4 to 6 weeks is
undertaken to ensure disabled hairs remain dormant and to
maintain permanently hair free skin.
HOW MANY TREATMENTS ARE REQUIRED?
Body Site Follicle
Density
per square cm
Resting
Phase
Time in
Resting
Phase
Active
Growth
Face 500
68%
10 weeks
30%
Arms 80
18%
5 months
79%
Legs 60
18%
6 months
79%
Armpit 65
28%
3 months
69%
Chest/Back 70
28%
3 months
69%
Pubic 70
25% 3 months 71%
© The Dezac Group
© The Dezac Group
© The Dezac Group
22
IPLPRO
How should I prepare my skin for IPL hair removal?
Ensure your skin is clean. IPL hair removal is most effective
on pale skin. Sunbathing, use of sun beds and fake tanning
should NOT be undertaken prior to treatment.
How should I prepare the hairs for IPL hair removal?
Shave the area to be treated. Minimising the length of the
hair enables the light energy to go directly to the hair root
and avoids hair burning on the surface of the skin.
What areas can I treat?
Most body hair can be removed using IPL - the most common
areas are underarms, legs, chest, back and bikini line.
Certain areas of the face can be treated, but it should not be
used around the eyes or the lips. Refer to ‘Facial Treatment’
section before using on the face.
What does it feel like?
Most people experience a warming of the skin. Slight irritation
similar to that of a minor sunburn may be felt if used on too
high a power level, or if the area has not been shaved. Men
undergoing the procedure experience greater discomfort as
male body hair is generally thicker than women’s, however the
sensation quickly disappears.
Can I use IPL hair removal on sensitive skin?
Yes, the IPL reacts with the hair, so the surrounding skin should
not be affected.
How will my skin appear after the treatment?
Usually there will be no perceptible change. A slight redness
after treatment may occur, but will normally fade over 24 hours.
There may be some localised redness around the hair follicle
- this is quite normal. However, if any redness or inflammation
remains after 24 hours this would indicate you have selected
too high a power level for your skin type. Please refer to the
“Patch Test” section.
After IPL hair removal is there anything to avoid?
Sun exposure or deep tanning should be avoided for at least
48 hours.
If the skin is exposed use a sunscreen. Also avoid using
abrasive cleansers or skin peeling treatments. Avoid swimming
in chlorinated water or using a hot tub for 48 hours. The chlorine
in the water can result in itchiness.
QUESTIONS AND ANSWERS
© The Dezac Group
© The Dezac Group
© The Dezac Group
23 IPLPRO
How often should I repeat IPL hair removal treatment?
The timing for follow on treatments is not critical. We initially
recommend treatments at 2 week intervals, although some
people like to treat the area every week and others just
once a month depending on personal preference and on
where the treatment area is. As long as the hair follicle or
surrounding skin is not red, sore or inflamed, treatment can
be repeated after a minimum of 48 hours. Choose a time
which is convenient for you. Avoid excessive treatment on
the same region at one time. This may cause reddening and
swelling. To maintain hair free skin and to ensure disabled
hair follicles remain dormant, repeat the treatment every 4 to
6 weeks or as required.
Is there any aftercare routine I should follow?
If you wish, you can apply an unperfumed soothing lotion, an
ice pack or wet towel to cool the treated areas, though we
recommend not using soap on the treated areas for 24 hours.
Take care to keep the treated area particularly clean for 3
days. When treating the underarms, avoid using antiperspirant
deodorant for 2–3 days. Avoid unnecessary sun exposure for
48 hours.
How many treatments will I need?
Long term hair removal with IPL is generally considered to
be effective after a minimum of six treatments over a period
of 6 months. This varies from person to person and depends
on the area you are treating, hair density, your hair’s growth
cycle and colour. Dark hair on fair skin responds to IPL best,
but both dark and fair hair may take several treatments for
long-term results. Initially with each treatment you will notice
a gradual thinning/reduction of hair growth in the treated
area. To maintain hair free skin and to ensure disabled hair
follicles remain dormant, repeat the treatment every 4 to 6
weeks or as required.
Can I use other hair removal methods between
treatments?
Because IPL treatment needs a hair to be present in the follicle,
hair removal methods which pluck the hair, such as waxing,
epilators and tweezing are NOT suitable for use between
treatments. Bleaching hairs is also NOT suitable as it removes
the pigment and renders IPL treatment ineffective. Shaving,
micro-dermabrasion discs and cream depilatories are ideal for
use between treatments.
QUESTIONS AND ANSWERS
© The Dezac Group
© The Dezac Group
© The Dezac Group
24
IPLPRO
What is the difference between IPL and a laser?
There are two big differences between Lasers and Intense
Pulsed Light. Generally IPL covers a much larger area than
the relatively small treatment spot with lasers and therefore
treatments of larger areas are much quicker. The other
difference is the wavelength of light produced. Lasers produce
light with a specific wavelength whilst IPL uses a broad
spectrum of wavelengths. This limits IPL to specific skin types.
How big is the treatment area?
35mm x 14mm
Why is it important to shave?
It is important that any area being treated is shaved so all the
light energy is directed straight to the hair root for maximum
effect. This also prevents burning of the hair above the skin
surface which can be uncomfortable.
What safety features does it have?
The main safety feature regulates the power level, so that it can
only be increased by 1 step per treatment, starting from power
level 1. This reduces the risk of using too high a power level.
Power can be decreased in as many steps as required.
Other safety features include:
• Akeylock
• Asecuritycodetopreventmisuse.
• Skinsensors onthewandtoensureIPLtreatment only
occurs when good contact is made with the skin.
• Abrightorange‘blinksafety’lightwhichwillcauseablink
reaction if pointed directly at the eye.
• AUVfilterintheIPLaperturetoavoidtheriskofdamaging
UV light.
• Overtemperaturedetection.
Are there any side effects?
As with all hair removers which use light energy, there may be
slight reddening of the skin after use or lightening of the skin in
patches. They should both disappear within 24 hours.
QUESTIONS AND ANSWERS
© The Dezac Group
© The Dezac Group
© The Dezac Group
25 IPLPRO
IMPORTANT MAINTENANCE
• Whennotinusestorekeyresponsiblyawayfromchildren.
• IPL should not cause significant discomfort. You may
feel a slight warming of the area. If you feel discomfort or
soreness the setting may be too high.
• Donotcoverventilationslotsonthewandduringuse.
• Donotplaceonasoftsurfacewhichmightblockthecooling
vents on the underside of the console.
• Donotuseafterdrinkingalcohol,ifyouarefeelingunwell
or fatigued
• Donotuseneartoshortwaveormicrowaveequipment.
• The equipment may be affected by electromagnetic
interference. If such effects are suspected please turn off
and turn back on to reset.
• Do not override any safety features.
• Do not use this product for any other purpose other than
described in the instructions.
• This product is for home-use. It is not intended for use in
a commercial environment.
• Onlyusethisproductwithhepowerleadsupplied.
• Aftereachuse,alwaysunplugthepowerleadandstore
out of reach of children.
• Ifthereisanydamagetotheunit,wandcable,wandor
power lead, stop using immediately.
• Ifthepowerleadisdamaged,itmustbereplacedbythe
manufacturer or its service agent or similarly qualified
person in order to avoid a hazard.
• Therearenouserserviceablepartsinsidetheunit,wand,or
treatment cartridge. Do not dissemble or repair. If you have
any problems with the product, contact our Customer Care
Department.
• Toclean,wipewithaslightlydampcloth.
• AbuildupofdepositsontheIPLaperturewillaffectthe
efficiency of IPL. If you notice any deposits, switch OFF
and unplug the mains lead. Clean with a lint free cloth or
cotton bud, ensuring no fibres are left on the aperture.
© The Dezac Group
© The Dezac Group
© The Dezac Group
26
IPLPRO
DISPOSAL
The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) has been put in place to recycle products
using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous
substances and avoid the increasing landfill.
The product is classed as Electrical or Electronic equipment so please ensure at the end of the life of this product and
its treatment cartridge they are disposed of in the correct manner in accordance with local authority requirements.
They must NOT be disposed of with household waste.
CUSTOMER CARE
If you have any questions, or if you experience any difficulties with this product, please call our Rio Careline on 01242 702345
or email us at: online@riobeauty.com
To register your two year guarantee online visit: www.riobeauty.com/warranty_online.htm
© The Dezac Group
© The Dezac Group
© The Dezac Group
UK
www.riobeauty.com
Rio, Dezac and IPLPRO are trademarks of The Dezac Group Ltd
© The Dezac Group Ltd 2012 Manufactured by The Dezac Group Ltd, PO Box 17, Cheltenham, England GL53 7ET
1-IN-IPHR2-UK/1.2
PATENTS PENDING
© The Dezac Group
© The Dezac Group
© The Dezac Group
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rio Beauty IPL Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rio Beauty IPL Pro in the language / languages: English as an attachment in your email.

The manual is 2.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info