744721

Rika Warm App Manual

34
Zoom out
Zoom in
Previous page
1/48
Next page
EXPLANATIONS
To activate the GSM function, the GSM setting must be set to ON under the SETUP / Settings
menu. You must also set the four-digit reception code.
You can select this code free. (On the following pages the numbers 1234 are used by way of
example to make the instructions comprehensible.)
The reception code is used to prevent unauthorised access to your GSM Modem.
According to a successfully command code a confirmation message will be sent. This is not
possible when you suppress your telephone number!
Important
To get answer messages enough credits on the SIM-card are necessary.
The GSM function is only possible in the extended comfort modes (HEAT/ROOM/AUTO), not in
EASY Mode.
Note:
When the GSM has been properly connected to the stove‘s interface and the plug has been
inserted into the power socket, the LED display on the modem will flash orange at brief intervals.
If there is adequate reception, the orange display will flash at long intervals.
Assembly steps
For the right positioning of the GSM modem /optional wireless room sensor you find the precut
perforations on the support plate of the motherboard.
1. Then the supplied GSM assembly plate is attached with two M4 screws, washers and nuts
(wireless room sensor four M4).
2. Attach GSM modem to the assembly plate using M3 x 20 mm slotted cheese head screws.
3. The mini antenna is screwed into the GSM modem, depending on the type of stove possibly
from the outside of the rear panel.
Mounting examples:
4. Now the mains plug and the enclosed cable adapter can be attached to the GSM modem.
Attach the cable adapter with the two knurled screws to the GSM modem.
5. Plug the free connector of the cable adapter into the D-subconnector and tighten using a
small screwdriver.
When all steps have been carried out, the rear panel can be reattached to the pellet stove.
|5
4
EN
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Warm App at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Warm App in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 6,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info