744706
7
Zoom out
Zoom in
Previous page
1/14
Next page
|7
EN
6
Multi Air fan
Enabling the Multi Air fan (ON) you get access to fan speed and fan
adaptation.
Fan level
The volume of convection air is adjustable from AUTO (adapts
automatically according to heating power), over to Level 1 (min) and
level 5 (max).
Fan area
In addition, it is possible to adapt the Multi Air fan speed (AUTO, level
1 to level 5) within +/- 30% of fan speed.
Frost protection
Only possible if a roomsensor is connected. If this function is
enabled (ON) and if the room temperature drops below the set value
(C - 10°C), your stove will start working.
This applies also outside the heating times and in operating state
STOVE OFF.
RIKA room sensor
For more information on this option, please consult the operating
instructions room sensor / RIKA radio room sensor. If there is a room
sensor built in you get access to temperture adjustment and power
requirement.
Temperture adjustment
It is possible to adjust the temperature shown in the infomenu.
Power requirement
(factory setting 3) The heating power is adjustable from level 1 (for
small rooms) to level 4 (for big rooms).
RIKA firenet
For more information on this option, please consult the operating
instructions RIKA firenet.
GSM
For more information on this option, please consult the operating
instructions RIKA GSM Control.
Screen Saver
Sets the time interval (OFF, from 1 min to 30 min) for activating the
screen saver.
Child lock
If this function is enabled (ON), a 4-digit code can be saved. Now, the
screen saver may only be disabled by entering the saved code.
Hotel mode
Enable the child lock (ON) and save a 4-digit code. Enable the hotel
mode. Await the activation of the screen saver.
You can only press the buttons ON OFF PLUS MINUS. Now a
selection of further functions is only possible by entering the saved
code.
Date/time
Sets date and time.
Language
Selects the desired language.
Resets
Kg till cleaning
Resets the supply rate to 700 - 1500 kg after a service has been
carried out.
Factory setting
Resets all stove settings to the factory setting.
Note
This reset may only be performed if the stove temperature is below
80°C!
Logging
Only for service technicians.
Service
Only for service technicians.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Touch Display V2-25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Touch Display V2-25 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Touch Display V2-25

Rika Touch Display V2-25 User Manual - German - 14 pages

Rika Touch Display V2-25 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info