744715
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
SETUP – Settings
In the SETUP – Settings main menu, heating times can be programmed, options
activated or then date and time set etc.
The required submenu is selected by pressing the corresponding button.
GSM
PIN-Code
GSM Su 15.03.2015
15:55
OFF
1234
Note
If functions are inactive due to lack of the respective module, they cannot be
selected.
SUBMENU ITEMS
Heating times
The heating times can be programmed in this submenu.
A decreasing temperature for the comfort mode can also be set.
Convection Fan
(only stoves with a built-in convection fan)
For detailled information please see page 9.
Frost Protection
(only with connected roomsensor)
This function allows selection of a minimum temperature at which the stove
starts to heat. The frost protection function is independent of any external
requirements and any set room temperatures. The function has top priority.
Room Sensor Calib. (Calibration)
(only with connected roomsensor)
Any deviation between the current displayed and actual room temperature can
be compensated for.
GSM
If a modem is connected, the stove GSM function can be activated and the
PinCode required entered numerically.
Screen saver
The waiting interval until the screen saver is activated is set in this submenu.
Child Lock
To prevent undesired operation, a code can be determined to be entered every
time the screen saver is left.
Date/Time
Date and time settings can be made.
Resets
This button is only available when the stove‘s temperature is below 80°C. After
finishing the service press the button „reset“ to reset the „Feed Rate Service”.
With “Enter” you reset the feed rate service to 700kg, quit with “X”. The button
“Factory Setting” will reset the complete stove settings, reset with „Enter“, quit
with „X“.
Service
(not accessible to final customers)
Additional information for the specialist dealer or service.
Heating Time Programme
The heating time programme operates the stove time-controlled. As soon
as the heating time function has been activated (ON) the buttons decreasing
temperature (only with room sensor) and heating time programme can be
selected.
Set Heating Times
Heating Times
Set Back Temp
Heating Times Su 15.03.2015
15:55
ON
14
Individual or several days can be selected at the same time and programmed
individually in the heating time programme (Automatic and Comfort Mode).
The week days selected are marked ORANGE.
By selecting the now active heating time buttons (heating time I and heating
time II), the required ON and OFF switching times can be entered numerically.
The week day buttons are shown GREEN after confirmation.
Repeat pressing of week day buttons already programmed permit viewing of
the defined heating times or these can be deleted again using the cancel button
(right next to the time displayed).
Heating Time II
Heating Time I
Heating Times Su 15.03.2015
15:55
ON OFF
##:## ##:##
Mo Tu We FrTh Sa Su
20:15 21:45
Tip
In the case of selected week days on which identical heating times have been
programmed, the respective settings of heating time I and/or heating time II
are shown.
If week days with different heating times have been selected then the hash
symbol appears in the time display (##:##).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Touch Display V2-12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Touch Display V2-12 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Touch Display V2-12

Rika Touch Display V2-12 User Manual - German - 12 pages

Rika Touch Display V2-12 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info