744634
14
Zoom out
Zoom in
Previous page
1/20
Next page
14
7. CLEANING AND MAINTENANCE
Basic information
Note
When you vacuum clean around the stove ensure that you do not
vacuum into the combustion air intake during heating operation.
You could vacuum out embers – FIRE RISK!
Note
Your stove must be cooled before any maintenance work is
performed.
Type Rikatronic4: Only work on the unit when it is switched off and
the mains plug has been disconnected.
The frequency with which the stove requires cleaning and the
maintenance intervals depend on the fuel you use. High moisture
content, ash, dust and chips may more than double the maintenance
required. Only use wood that has been stored properly and is dry
and untreated.
Note
Ash may contain embers – only place ash in sheet steel containers.
FIRE RISK! In a cold state, dispose it of in the household waste.
Cleaning the combustion chamber
The combustion chamber must be regularly cleaned from ash to
ensure an adequate supply of air. If you remove the grate using a
hook, you can sweep the ashes with a broom in the ash tray. You can
also use an ash vacuum cleaner.
only type RIKATRONIC4:
Remove the grate and vacuum out the ignition sled and the pipe of
the ignition.
Note
Only when the stove is cold! You could vacuum out embers – FIRE
RISK!
Empty the ash drawer
Empty the ash drawer regularly. The ash drawer is simply pulled
forward with the combustion chamber door open.
Checking the door contact
(Only for models with Rikatronic)
Check that the door contact switch is working at regular intervals.
Press the door contact several times with your hand to prevent it
from sticking.
Cleaning the door glass
The glass can be cleaned best with a moist cloth. Stubborn dirt can
be removed with a special cleaner (free from corrosive acids and
solvents - otherwise there is a risk of damage to the glass surface)
available from your stove dealer. Usual cleaners containing acid or
solvents can be too harsh and damage the glass.
Note
Never use abrasive or aggressive cleaning agents to clean the
wooden door handle, these will damage the wood.
Cleaning the flame temperature sensor
(only type Rikatronic4)
Remove the dust deposits from the sensor at regular intervals. Use a
clean cleaning cloth or newspaper.
Cleaning painted surfaces
Wipe the painted surfaces with a damp cloth, do not scrub. Do not
use solvent-containing cleaners.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Sol at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Sol in the language / languages: English as an attachment in your email.

The manual is 8,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Sol

Rika Sol User Manual - German - 20 pages

Rika Sol User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info