744683
19
Zoom out
Zoom in
Previous page
1/24
Next page
|19
18
EN
Loosen the wing screws on all cleaning openings, as marked.
Suck the combustion residues from the flue collecting ducts and the
transition areas.
Mount the removed parts in reverse order.
Turn the lock screws on the pull-out guide upwards again, carefully
pushing the stove module into the warm-air tiled stove.
Secure the stove with the mechanical lock against unintentional
rolling out.
Note
If the mechanical lock is not in (horizontal) operating position, an
error message “stove not in position” will be displayed once power
supply has been established again.
Note
Your stove may suck in false air via incorrectly sealed cleaning
covers; this air may lead to incomplete combustion in the fire
trough and thus piling up of pellets. DANGER of FIRE!
To ensure the proper operation of your pellet stove, replace any
defect (porous, frayed) seals after cleaning and maintenance.
Cleaning the flue pipes
(annually)
Remove the flue pipes. Inspect and clean the chimney connection.
Brush off any soot and dust deposits in the fire and in the flue pipes
and vacuum.
Note
Accumulated fly ash in the flue gas channels may impair the
performance of the stove and pose a safety risk.
Combustion air - intake
If necessary, please also clean the air intake with a hoover.
Note
Only when the stove is cold! You could vacuum out embers – FIRE
RISK!
Cleaning the convection air openings
Vacuum clean any dust deposits from the convection air openings
at regular intervals.
The stove should be cleaned thoroughly prior to the start of the
heating season to prevent excess odour.
Note
To prevent your stove from overheating of the internal components,
do never cover the convection fins!
Cleaning the pellet container
Do not refill the completely empty container immediately; remove
the residues (dust, chippings etc.) from the empty container.
Checking door seal
(annually)
The condition of the seals at doors and glass should be checked at
least once a year. Repair or replace seals depending on condition.
Note
Only intact seals ensure your stove works perfectly!
Bearings
(annually)
All built-in bearings (pellet screw) should be checked. Clean or
replace bearings depending on condition.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Revivo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Revivo in the language / languages: English as an attachment in your email.

The manual is 9,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Revivo

Rika Revivo Additional guide - English - 1 pages

Rika Revivo User Manual - German - 24 pages

Rika Revivo Additional guide - German, Dutch - 1 pages

Rika Revivo Installation Guide - Dutch - 16 pages

Rika Revivo User Manual - Dutch - 24 pages

Rika Revivo Additional guide - French, Italian - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info