745570
5
Zoom out
Zoom in
Previous page
1/24
Next page
Page 5 of 24
3. Assembly of the pellet control
3.1. General information
Danger! Remove the power plug of the stove from the wall socket before
working on the device.
When assembling do not allow objects (screws, etc) to fall into the firebox or
hopper - they could block the auger and damage the stove.
Before carrying out work on the
stove, the stove must be switched
off and cooled.
CAUTION: The pellet control must
only be installed by authorized
service technician!
Pellet control symbols
3.2. Wall mounting, cable routing
Remove the front of the housing by pressing sideways on the rear section.
To route the cables upwards break off the press-out points provided on the
housing. To route the cables downwards use the opening in the housing rear
panel. Then mount the housing on the wall using the rear panel.
3.3. Cable specification
To connect the operating unit you will require a commercially available 4-pin
sheave cable. The cable enables all data exchange between the main board
and the pellet control and the electrical supply.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Pellet Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Pellet Control in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Pellet Control

Rika Pellet Control User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info