744676
24
Zoom out
Zoom in
Previous page
1/28
Next page
24
12. PROBLEMS  POSSIBLE SOLUTIONS
Problem 1
Fire burns with weak, orange flame� Pellets heap up in fire trough,
window sooted up
Cause(s) pellet operation
QInsufficient combustion air
QPoor chimney draught
QStove is sooted over inside
Cause(s) log operation
QPoor chimney draught
QToo much fuel
QDamp wood
QIncorrect heating up
QStove is sooted over inside
Possible solutions pellet operation
QRemove any ash or clinker from the fire trough that may block the
air inlets� If possible swap to better pellet quality (see CLEANING
AND MAINTENANCE)
QCheck whether flue gas pipes are blocked with ash (see CLEANING
AND MAINTENANCE)
QCheck whether the suction nozzles and air inlet pipe or flue tube
are blocked�
QCheck door and cleaning cover seals for leaks (see CLEANING AND
MAINTENANCE)
QClean blower impeller (see CLEANING AND MAINTENANCE)
QHave service performed by authorised specialist company�
QEvery glass plate must be cleaned from time to time (depending
on use) with glass cleaner
Possible solutions log operation
QUse dry wood and correct fuel amounts (see BRIEF INFORMATION ON
FUEL - LOGS)
Problem 2
Stove smells strongly and / or fumes are emitted
Cause(s) pellet / log operation
QBurning-in phase (taking into service)
QStove has accumulated dust and/or dirt
Possible solutions pellet / log operation
QWait to end of burning-in phase and vent sufficiently
QSuction off any dust deposits from the convection air openings at
regular intervals
Problem 3
Flue gas discharge when wood is added and during heating phase
Cause(s) pellet / log operation
QFlue gas flap is not open for refueling
QCombustion chamber door opened too fast
QToo much ash in combustion chamber
QAdding logs to snappy
QChimney draught too low
QFlue pipe connection leaks
QLogs combustion still running (visible flame)
QInspection openings leak
Possible solutions pellet / log operation
QOpen the flue gas flap for refueling
Qopen the combustion chamber door moderate
Qregular cleaning of combustion chamber (vacuum)
QAdding logs carefully
QCheck chimney
QCheck connections and if necessary re-seal
QAdd logs after flame is gone (display: „please add logs“)
QCheck seals and replace (fire door, plaster cover, ��)
Note
Please note that checks on the control system and wiring ma
only be performed in unit switched dead� Any repairs may only be
performed by trained specialists�
Tip
If a malfunction message occurs, the cause must first be remedied;
the unit can be put back into operation by acknowledging the
malfunction at the touch display�
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Paro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Paro in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Paro

Rika Paro User Manual - German - 28 pages

Rika Paro User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info