744676
15
Zoom out
Zoom in
Previous page
1/28
Next page
|15
EN
14
4. TECHNOLOGY AND SAFETY FUNCTIONS
The technological advances in your new combi stove are the result of
years of testing and practical experience� The practical advantages
of your pellet/log stove are convincing:
The range of operating modes leaves nothing to be desired� The
automatic fuel detection means the operating mode can be changed
at any time (simply add logs during pellet operation or ignite logs
with the pellet burner)�
Manually regulated currentless log operation is also possible� This
ensures faultless operation even in the case of longer power cuts�
Operating comfort
The microprocessor-controlled combustion regulation optimises
the interaction of flue gas blower, air flap position and screw using
the current combustion chamber temperature� This guarantees
optimum combustion and operating status in both pellet and log
operation�
All function can be regulated centrally using the integrated touch
display� The intuitive graphic interface permits easy operation; all
the settings can be made quickly and simply�
Top efficiency - lowest emissions
A very great heat exchange surface together with optimum
combustion air control leads to excellent fuel utilisation�
Fine continuous pellet dosing in an optimised burner pot made of
high-quality grey cast iron leads to virtually complete combustion
with very good exhaust gas values - and this is guaranteed in every
operating phase
The combination of temperature-controlled automatic air regulation
and optimised wood retainer geometry enable combustion with
minimum emissions at top efficiency in log operation�
Note
During operation, the flame noise, pellets dropping and actuation
of the electronic components are audible due to the automatic
control�
Note
Solid fuels like pellets and logs that can cause a fogging of the
door glass during the combustion, particularly with the very fine
ash from wood pellets�
By external influences such as chimney draft or pellet quality this
coating can be very bright or dark black (especially with low power
)� This is a natural process and is not a shortage�
We therefore recommend regular cleaning of the door glass, just
because soot is an excellent insulator and thus the heat dissipation
can be reduced�
If the stove is heated according to its function in the combined
operation, a significant improvement can be achieved due to the
higher temperatures in log wood mode�
Low-temperature shutdown
The unit switches off if the stove cools below a minimum temperature�
This switch-off may occur if pellet ignition is delayed�
Electrical excess current protection
The stove has a main fuse (at the rear) to protect against excess
current�
Flue gas flap
If faultless operation is no longer ensured due to a component
defect or power cut, the fluegas flap is opened� The flue gas flows
directly in the chimney� This ensures a safe burning off of the fuel in
the combustion chamber
Note
Be sure to close the flue gas flap for a proper, automatic function
of the log mode�
Note
Check with every maintenance / cleaning the correct operation of
the flue flaps�
Automatic cleaning cycle
The speed of the flue gas fan is increased every hour for a short
period to blow ash from the burn pot, increasing the operational
safety� The status indicator CLEANING appears on the display�
Every 5 hours (interval adjustable) an additionally automatic cleaning
cycle is performed� The stove stops, the automatic cleaning tilts the
grid and then re-ignites the stove� The status indicator CLEANING
appears on the display continuously� The cleaning procedure with
tilting the grid is to convey ash and clinker from the burn pot into
the ash drawer
Note
At runtime of the cleaning cycle occures a noise due to the turning
grid (stove start or big cleaning)�
Note
This additional function does not replace a manual cleaning as
described in CLEANING and MAINTENANCE, as this is absolutely
necessary to do regularly�
Component monitoring
All the electrical components used are continuously monitored
during operation� If a component is defective or can no longer be
actuated correctly, then operation is stopped and a warning or error
message is issued (see MANUAL TOUCH DISPLAY)
Auger motor monitoring
Too long or wet pellets as well as pellets with too high dust content
(see BRIEF INFORMATION ON FUEL PELLETS) can cause so-called
auger jammers” in the auger channel� This may also happen if the
pellets accumulate in the burn pot and the backlog reaches into
the chute� The auger motor reacts in both cases with an increased
current consumption, which causes the error message: INSERTION
MOTOR JAMMED� The stove will be stopped� Please call the customer
service immediately�
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Paro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Paro in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Paro

Rika Paro User Manual - German - 28 pages

Rika Paro User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info