744675
18
Zoom out
Zoom in
Previous page
1/24
Next page
18
9. CLEANING
Tip
Your RIKA dealer will gladly advise you about their service and
maintenance offers.
Depending on pellet consumption, a message prompting cleaning of
the stove appears on the display in regular intervals. This message
can be acknowledged on the Touch Display, while continuing
operation. Perform a cleaning cycle at the next opportunity.
Subsequently, reset the counter in the SETTINGS menu / RESETS
submenu, as per operating instructions of TOUCH DISPLAY.
Tip
The message will only stop reappearing once you have reset the
feed volume in the SETTINGS / Resets menu.
Note
Your stove must be switched off and cooled before any maintenance
work is performed. Only work on the unit when the mains plug has
been disconnected.
Cleaning the convection air openings
Vacuum clean any dust deposits from the convection air openings
at regular intervals.
The stove should be cleaned thoroughly prior to the start of the
heating season to prevent excess odour.
Note
To prevent your stove from overheating of the internal components,
do never cover the convection fins!
Bearings
(annually)
All built-in bearings (pellet screw) should be checked. Clean or
replace bearings depending on condition.
Check seals
(annually)
Check the condition of the seals at least once a year. Repair or
replace seals depending on condition.
Note
Only intact seals ensure your stove works perfectly!
Tip
You will find the seals and sealing kit in the spare part overview.
Combustion air - intake
If necessary, please also clean the air intake with a hoover.
Note
Only when the stove is cold! You could vacuum out embers – FIRE
RISK!
Cleaning the pellet container
Do not refill the completely empty container immediately; remove
the residues (dust, chippings etc.) from the empty container. The unit
must be disconnected from the mains!
Cleaning the flue gas channels and flue
gas collecting duct
The flue gas channels are situated beneath and beside the
combustion chamber.
Lift the convection fin straight up.
Loosen the wing nut on the lid of the cleaning opening, tilting the
eyescrew sidewards. Open the lid as far as the stop.
Now clean the flues and baffles with the supplied brush. Vacuum the
combustion residues with a vacuum cleaner.
Open the combustion chamber door and remove the two wing
screws. Open the front cover panel.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Livo RAO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Livo RAO in the language / languages: English as an attachment in your email.

The manual is 10,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Livo RAO

Rika Livo RAO User Manual - German - 24 pages

Rika Livo RAO User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info