745572
26
Zoom out
Zoom in
Previous page
1/36
Next page
7. OPERATION
Save your telephone-number (done only once)
The operation of the stove is controlled by SMS commands. These
consist of the reception code you selected (described earlier) and a
command. After correct installation of the GSM set you must save a
valid telephone number on the device. (This is not possible when you
suppress your telephone number.)
In this case the TEL command follows the reception code.
Example-SMS
1234 TEL
(Note the SPACE
between code and
command)
The device will save the telephone
number and send a confirmation
message back (MOBILE NUMBER „your
number“ OK).
Now you are able to set the stove to another operating mode by using
SMS-commands.
Note
You are also able to save a new number by sending a TEL code
again.
You also can send commands without registering a telephone number
using simply the reception code. In this case you will get back a
message „Please save TEL. number“ in your answer-SMS.
Caution:
If no telephone number is stored at the device you will not receive
any message in case of errors.
The simplest command is switching ON and OFF:
Example SMS:
1234 ON
(Note the SPACE
between reception and
command code)
Device ON with presetting (operating
mode and setting maintained from
previous operation)
1234 OFF Device OFF
Command Input and Responses from Stove Software
Version 1.12/Touchscreen Software Version 1.22
(case insensitivity)
Start in the Manual Mode by specifying the heat output without
heating time:
for example:
1234 M70
Please note the space between the numerical
code and specification! The response (SMS reply)
reads: Manual Mode 70%
Start in the Automatic Mode by specifying the heat output with
heating times preassigned (If no heating times are stored , the stove
remains in standby)
for example:
1234 A70
The response (SMS reply) reads:
Automatic Mode 70 %, Heating Times Active
Start in the Comfort Mode by specifying the target room temperature
without heating times:
for example:
1234 C22
The response (SMS reply) reads:
Comfort Mode 22°C
Start in the Comfort Mode and specify the target room temperature
with heating times preassigned:
for example:
1234 CT22
The response (SMS reply) reads:
Comfort Mode 22°C, Heating Times Active
Switching off the pellet burner:
for example:
1234 OFF
The response (SMS reply) reads:
STOVE OFF
Frost Protection
It is possible to activate and deactivate the function frost protection
here:
for example:
1234 FON
The response (SMS reply) reads:
FROST PROTECTION ON
for example:
1234 FOFF
The response (SMS reply) reads:
FROST PROTECTION OFF
Operating parameter queries
Various set parameters are sent here (status, day heating times, actual
room temperature, etc.):
for example:
1234 ?
The response (SMS reply) reads:
Stove ON
AUTOMATIC MODE 65%
BURN OFF
HT1 ...
The current status, for example, could be: inactive, ignition, manual
mode, cleaning phase, etc.
HT1: Heating time 1 (if no heating time is set, 00:00 is displayed)
HT2: Heating time 2 (if no heating time is set, 00:00 is displayed)
RT: Actual room temperature (only with connected room sensor)
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Interno GSM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Interno GSM in the language / languages: German as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info