626525
16
Zoom out
Zoom in
Previous page
1/28
Next page
GB
Z1209004. 5 GB
Enjoy the RIHO life-style
GB
GB
Whirlpool Electronic LCD user handbook
4.1.7 Run dry function
Automatic run-dry function:
If you take a bath and the level sensor is covered with water for 5 minutes (bath full indication ), the
automatic run-dry function (8minutes) will start after the bath is emptied. During the 8 minute waiting period the
LCD screen will display the countdown time. The run-dry function will then start.
Attention: This function may be switched off by a dipswitch at the time of installation.
4.2 Menu functions
Beneath this button there are extra functions for switching on and off. This depends to a great extent on the
system that you have bought and the options associated with it. This section describes all the possibilities, but
if you don't have the options that are discussed then the option functions will not appear on the screen.
ATTENTION: The button has several functions. If you press and hold down this button you access
a programmer menu that will be discussed later.
4.2.1 Short menu (select menu options).
If you press this button briefly the following screen appears:
Short
Manual
run-dry
function
Automatic
run-dry
function
If both buttons are pressed down simultaneously for 2 seconds the run dry function starts if there is “no” water
in the bath (bath empty indication ).
The following occurs automatically:
- The display shows the run-dry function.
- The shut off valve opens after 5 seconds
- The hydro motors will be switched on for a few seconds.
- The aero-motor will be switched on for 45 seconds.
- The motors then stop and the display shows RIHO again.
If both buttons are pressed simultaneously for two seconds the cleanpool function starts, provided that the
level indication shows full and there is sufficient liquid in the reservoir and no other function is active (no light).
All jets must be completely under water.
1: Display shows clean function and countdown timer.
2: After 8 seconds all motors and valves are switched on.
The motor of the aero-system on the other hand switches alternately on and off (20 seconds.
This is to achieve a cleaning process in the aerojet housing.
3: After 7 seconds the cleanpool switches on for 3 seconds.
4: The motors stop after 1½ minutes with circulation pumping prior to a pause of 30 seconds
5: The motors are restarted for 1½ minutes. The motor of the aero system should then start
switching off and on alternatively again
6: End of cleaning function, system returns to rest.
7: The display shows that your bath needs to be evacuated and that the water contains cleaning
material and is therefore not suitable for bathing.
Note:
If the water level drops the cleaning cycle stops.
If you wish to end the cleanpool function earlier press once on one of the two buttons or .
Display clean function
with countdown timer
Display bath evacuation.
You will not be able to
use any function until the
system is evacuated.
Warning
No cleaning fluid
present
4.1.6 Cleanpool option.
-43--42-
12:10
12:10
178 sec
12:10
12:10
20 sec
19°C 12:10
okok
OK
12:10
480 sec
12:10
20 sec
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Riho Whirlpool Electronic LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Riho Whirlpool Electronic LCD in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Riho Whirlpool Electronic LCD

Riho Whirlpool Electronic LCD User Manual - German, Dutch - 33 pages

Riho Whirlpool Electronic LCD Usermanual and installation guide - Dutch - 28 pages

Riho Whirlpool Electronic LCD User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info