626525
13
Zoom out
Zoom in
Previous page
1/28
Next page
GB
Z1209004. 5 GB
Enjoy the RIHO life-style
GB
GB
Whirlpool Electronic LCD user handbook
4.1.4 Diverse options
- Light function option.
Switch on only if there is sufficient water (bath full indication ).
The light will switch on after pressing the light pushbutton once. The light function will switch off after 20 minutes.
If the light function is on and the water level drops (2 seconds), the light function will switch off.
If the light function is switched on and the whirlpool motor is started, the time for the light function will be set at
the running time of the motor + 5 minutes. In other words, after the running of the whirlpool motor is
completed, the light will remain on for another 5 minutes. If the motor is switched off between times, the light
function will switch off 5 minutes later.
The light will switch off after pressing the light button briefly.
- Colour therapy option
Switch on only if there is sufficient water (bath full indication ).
When the light button is held down colour therapy switches on. Colour therapy will switch off after 20 minutes.
If you press the light button during colour therapy the colour changing stops. If you press the button again
colour changing restarts. If you wish to stop the function earlier then hold down the light button and the colour
therapy will be turned off.
If the colour therapy is on and the water level drops (2 seconds), the colour therapy will switch off.
If the colour therapy is switched on and the whirlpool motor is started, the time for the colour therapy will be set
at the running time + 5 minutes. In other words, after the running of the whirlpool motor is completed, the light
will remain on for another 5 minutes. If the motor is switched off between times, the colour therapy will switch
off 5 minutes later.
Technical info: The light exists of LED lights. LED lights have a very long lifecycle and therefore don't have to
be replaced. In case the color therapy is malfunctioning, it can only be replaced or repaired by a certified
installer.
Technical info: The color therapy exists of LED lights. LED lights have a very long lifecycle and therefore don't
have to be replaced. In case the color therapy is malfunctioning, it can only be replaced or repaired by a
certified installer.
light indication colour therapy indication
If the whirlpool system is fitted with heating a heating unit is installed in the suction pipe of the Ist hydromoter.
This unit can only provide heat if water is actually flowing through it. The 1st hydro system must therefore be
switched on. When you have switched on the heating unit, this is displayed on the screen (for hydro function)
by the symbol . This symbol also indicates the required temperature that is set. As soon as the required
water temperature (see water temperature indication) is reached the heating switches off automatically.
If the temperature drops, the heater will automatically go back on. To measure the temperature of the water a
temperature sensor is located near the heating unit.
The heater option is designed to heat the water to maintain temperature and not to bring cold water, for
example 19 °C to 45 °C.
45°C
Water temperature indication
4.1 Basic functions
This pushbutton is used to switch the hydro system on and off.
- Short press, switch system on/off.
- Long press, see user options
In the case of the hydro-whirlpool system with back and foot jets that are separately connected by a
valve, or are controlled by a pump, the button can be used to move through the various
combinations one after the other.
This pushbutton is used to switch the ground system on and off.
- Short press, switch system on/off.
- Long press, see user options.
This pushbutton is used to adjust the speed of the motor for a pulsation effect. The display shows when the
pulsation starts. The display has two of these buttons. The pulsation button operates the system to the left of
this button.
The following description applies to both buttons, which can be operated independently.
- First push, the system automatically pulses water between 35% and 100% for a period of about 8 seconds.
The display shows pulsating waves.
- Second push, the system operates automatically at the speed at the moment when the button is pushed.
- Third push, the system automatically returns to 100% operation and begins to pulse automatically again.
See first push.
- Switch off the pulsation position by pressing and holding down the pulsation button.
If you start with this button instead of or , the system will then start pulsating directly.
If you require both pulsations to be on, this is then possible. The pulsation effects of each system run
synchronously with each other for maximum effect.
Pulsation position
4.1.1 Hydro-system.
4.1.2 Ground system.
4.1.3 Pulsation positions.
4.1.5 Heating option
-41--40-
heating indication
19°C 12:1019°C 12:10
19°C 12:10
19°C 12:10
12:10
19°C 12:10
45°C
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Riho Whirlpool Electronic LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Riho Whirlpool Electronic LCD in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Riho Whirlpool Electronic LCD

Riho Whirlpool Electronic LCD User Manual - German, Dutch - 33 pages

Riho Whirlpool Electronic LCD Usermanual and installation guide - Dutch - 28 pages

Riho Whirlpool Electronic LCD User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info