Manual Riho Whirlpool Electronic LCD (page 7 of 28) (English)

626525

Zoom out

Zoom in

1/28

Z1209004. 5 GB

Enjoy the RIHO life-style

Whirlpool Electronic LCD user handbook

1.5.3 Panels

Where panels are used, do not seal them. They must be removable.

- Fill half the bath with water and check whether the bath is still horizontal. This is necessary. Use the adjustable legs

for correction. Check whether the drain pipeline connection is watertight and then top up the bath up to the overflow

outlet. Allow the same to overflow and check the sealing and proper drainage of water via the overflow connection.

- The open sides of the bath may be finished with plastic panels or with a tile wall. This may be done for the entire rim,

or only in certain sections.

- For sealing the bath joints, only use acid-free silicon sealant suitable for plumbing applications.

- The bath may be placed in several ways:

- The bath may be placed against the tiles of the wall. Apply silicon sealant all around the rim to absorb the

movements of the bath if any. This 4 to 5 mm a space is required to absorb the torsional forces acting on

the rim of the bath.

- When the bath is finished with a wall on the underside instead of a plastic panel, there should be a joint

between the top of the wall or row of tiles and the bottom of the bath of 4-5mm.

This joint must also be sealed.

The silicon sealant provides a good watertight finishing join and allows the bath to expand to some extent. It is also

necessary to fill the bath with water up to the overflow rim and to ensure that the bath is resting properly on all its legs

before you start sealing.

In case of doubt, consult a plumbing specialist.

1.5.1 Ventilation grid.

In order to ensure optimum operation of the motor(s), it is necessary to install a ventilation grid in the edge or in the

wall under the bath. This grid must be splash-proof and placed so that splashing water does not find its way under the

bath. The minimum effective flow surface of the grid must be 100cm², and should not vent in places where the

temperature is less than +15°C and more than +35°C. (See Fig. 4:

In case of doubt, consult a plumbing specialist.

Figure 4 Ventilation grid.

1.5.2 Inspection hatch(es).

To enable maintenance the tub panel or wall must be fitted with a splash-proof hatch with a size of at least 40x50cm.

To be able to service the motors, it is necessary to fit a hatch for each separate motor. See figure 5. You can order

Riho magnet tile inspection hatch sets from your dealer, Riho part no. ZA 110000000005. The Riho maintenance

service cannot service the motors if there are no inspection hatches or if the hatches are too small. For the best

accessibility to the system Riho advices you use synthetic front panels (if available for the bath type).

If in doubt, contact a specialist.

-35--34-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Riho Whirlpool Electronic LCD in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Riho Whirlpool Electronic LCD

Riho Whirlpool Electronic LCD User Manual - German, Dutch - 33 pages

Riho Whirlpool Electronic LCD Usermanual and installation guide - Dutch - 28 pages

Riho Whirlpool Electronic LCD User Manual - French - 33 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Riho Whirlpool Electronic LCD Manual

Product: