Manual Riello BGK0.1 (page 35 of 52) (English, German, Dutch, French, Italian)

643290

Zoom out

Zoom in

1/52

2922

3. INSTALLATION

THE BURNER MUST BE INSTALLED IN CONFORMITY WITH LEGISLATION AND LOCAL STANDARDS.

3.1 BOILER FIXING

➤

Insert the recirculating pipe (1) on the burner blast tube (2) and fix it with the screw (3), (see fig. 2).

Attention:

respect the dimensions, as described in chapter “2.2 OVERALL DIMENSIONS“ at page 2.

➤

Put on the flange (4) the screw and two nuts, (see fig. 4).

➤

Widen, if necessary, the insulating gasket holes (5), (see fig. 5).

➤

Fix the flange (4) to the boiler door (6) using screws (7) and

(if necessary)

the nuts (8)

interposing the

insulating gasket (5)

, (see fig. 3).

3.2 FUEL SUPPLY

The burner is designed to allow entry of the oil supply pipes on either side.

Depending on the oil supply pipes position (to the right or to the left hand side of the burner) the fixing plate

(1)

and closing plate

(2)

should be reversed, (see fig. 6).

S7708

D5012

Fig. 5

Fig. 2

Fig. 4

Fig. 3

E9163

S7709

Boiler door must have a max. thickness

of 80 mm, refractory linig included.

IMPORTANT

D5700

21 1

Fig. 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Riello BGK0.1 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Riello BGK0.1 Manual

Product: