780476
19
Zoom out
Zoom in
Previous page
1/42
Next page
19
6. HOW THINGS WORK
It’s important to your performance, enjoyment and safety to
understand how things work on your bicycle. Even if you're an
experienced bicyclist, don't assume that the way things work on your
new bike is the same as how they work on older bikes. Be sure to
read - and to understand - this section of the Manual. If you have
even the slightest doubt as to whether you understand something,
talk to your dealer.
6.1. Wheel Quick Release
WARNING: Riding with an improperly adjusted wheel quick release
can allow the wheel to wobble or disengage from the bicycle, causing
damage to the bicycle, and serious injury or death to the rider.
Therefore, it is essential that you:
1) Ask your dealer to help you make sure you know how to install
and remove your wheel safely.
2) Understand and apply the correct technique for clamping your
wheel in place with a quick release.
3) Each time, before you ride the bike, check that the wheel is
securely clamped.
Invented in the 1930s to allow quick, easy wheel removal without the
need for tools, the bicycle wheel quick release has become standard
equipment on most recreational, sports and competition bicycles.
While it looks like a long bolt with a lever on one end and a nut on
the other, the wheel quick release uses a cam action to clamp the
bike's wheel in place (see fig. 11). Because of its adjustable nature, it
is critical that you understand how it works and how to use it
properly.
CAUTION: The full force of the cam action is needed to clamp the
wheel securely. Holding the nut with one hand and turning the lever
like a wing nut with the other hand until everything is as tight as you
can get it will not clamp the wheel safely in the dropouts.
6.1.1. Adjusting the quick release mechanism
The wheel hub is clamped in place by the force of the quick release
cam pushing against one dropout and pulling the tension adjusting
nut, by way of the skewer, against the other dropout. The amount of
clamping force is controlled by the tension adjusting nut. Turning the
tension adjusting nut clockwise while keeping the cam lever from
rotating increases clamping force; turning it counterclockwise while
keeping the cam lever from rotating reduces clamping force. Less
than half a turn of the tension adjusting nut can make the difference
between safe clamping force and unsafe clamping force.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ridley Mountain Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ridley Mountain Bike in the language / languages: English as an attachment in your email.

The manual is 1.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info