780478
36
Zoom out
Zoom in
Previous page
1/42
Next page
36
7.1.5. Installing extra parts:
The following parts are not assembled to the frame when the bicycle
is boxed and must be mounted before riding. These parts must be
installed by your authorized Ridley dealer.
7.1.5.a. Stem/Handlebar:
The following directions ONLY apply to 4ZA stem and handlebars.
For other brands, refer to that manufacturer’s instructions.
The stem and handlebar are not firmly mounted and must be aligned
and tightened before riding the bicycle. First, slightly loosen the stem
and stem cap bolts. Turn the stem so that it is in line with the wheel
and pointing exactly straight. Making sure the headset is properly
adjusted, tighten the stem bolts to 10Nm.
Rotate the handlebar so that the handlebar is centered in the stem
clamp. The brake/shift levers should offer a comfortable and safe
riding position. Tighten the handlebar clamp bolts on the stem to
8Nm.
7.1.5.b. Rear derailleur:
These parts have to be installed according to that manufacturer’s
instructions.
7.1.5.c. Wheels:
Unscrew and remove the bolt and 1 spring from the quick release
and Insert the quick release skewer through the hub, with the lever
on the left side of the bicycle. Place the spring onto the skewer and
lightly thread the nut onto the skewer. Making sure the quick release
lever is in the open position (lever should be pointing straight out and
“open” should be visible on the lever), continue to thread the nut until
almost tight, and tightly close the lever.
If the lever is too tight and does not fully clamp, open the lever,
slightly loosen the nut, and re-clamp the lever. Likewise, if the lever
is too loose, open the lever, slightly tighten the nut, and re-clamp the
lever. Make sure that the lever is firmly clamped failure to do so
may cause the quick release to open while riding, resulting in serious
injury or death.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ridley City Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ridley City Bike in the language / languages: English as an attachment in your email.

The manual is 1.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info