639214
57
Zoom out
Zoom in
Previous page
1/120
Next page
Select whether to enable or disable the policy.
[Name]
Enter the name of the policy. Can contain up to 16 characters.
[Address Type]
Select IPv4 or IPv6 as the type of IP address to be used in IPsec communication.
[Local Address]
Displays the IP address of this printer.
[Remote Address]
Enter the IPv4 or IPv6 address of the device with which to communicate.
Can contain up to 39 characters.
[Prefix Length]
Enter the prefix length of the Remote Address, using a value between 1 and 128. If this setting
is left blank, "32" (IPv4) or "128" (IPv6) will be automatically selected.
[Action]
Specify how the IP packets are processed from the following:
[Allow]
IP packets are both sent and received without IPsec applied to them.
[Drop]
IP packets are discarded.
[Require Security]
IPsec is applied to IP packets that are both sent and received.
If you have selected [Require Security], you must configure [IPsec Settings] and [IKE Settings].
IPsec Settings
[Encapsulation Type]
Specify the encapsulation type from the following:
[Transport]
Select this mode to secure only the payload section of each IP packet when
communicating with IPsec compliant devices.
[Tunnel]
Select this mode to secure every section of each IP packet. We recommend this type for
communication between security gateways (such as VPN devices).
[Security Protocol]
Select the security protocol from the following:
[AH]
Using Web Image Monitor
55
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh SP 311DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh SP 311DN in the language / languages: English as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh SP 311DN

Ricoh SP 311DN User Manual - German - 128 pages

Ricoh SP 311DN User Manual - Dutch - 124 pages

Ricoh SP 311DN Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info