639407
147
Zoom out
Zoom in
Previous page
1/168
Next page
Message Causes Solutions
Memory Data Lost Data in the memory was deleted
due to a memory fault.
The machine prints Power Failure Report
and recovers from the error automatically.
Cancel Printing
I/O Timeout
The timeout period set in [I/O
Timeout] expires when printing
is frequently interrupted by data
from other ports, or when the
print job is large and takes time
for processing.
Set [I/O Timeout] to a larger value than
the current setting. For details, see
page 115 "Printer Features Settings".
Cannot Print
Memory Overflow
The data is too large or
complex to print.
Select [600 x 600 dpi] in [Resolution] to
reduce the size of data. For details, see the
Printer Driver Help.
Paper Size Mismatch
Press Start or Stop
The paper size set for the
document differs from the size of
the paper.
Press the [Start] key to begin printing,
or press the [Clear/Stop] key to
cancel the job.
If [Auto Continue] is set to [0 sec.], no
error message appears.
Paper Type
Mismatch
Press Start or Stop
The paper type set for the
document differs from the type
of the paper.
Press the [Start] key to begin printing,
or press the [Clear/Stop] key to
cancel the job.
If [Auto Continue] is set to [0 sec.], no
error message appears.
Scan USB Disconnect The USB cable was
disconnected while scanning
from a computer.
Reconnect the USB cable properly, and
then try the operation again.
Fax Job Memory
Over
The number of fax jobs in
memory has reached the limit,
so new jobs cannot be stored.
Wait until pending jobs have been
transmitted or printed.
No Destination No destination is
registered in the selected
Speed Dial.
You have attempted to
redial, but there is no any
redial data (history).
Enter the fax number manually.
Error and Status Indicate on the Control Panel
145
147


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh SP 111SF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh SP 111SF in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info