104112
55
Zoom out
Zoom in
Previous page
1/128
Next page
53
Shooting
2
Note
The focus, exposure compensation and white balance are locked in
the state in effect when the shutter button was pressed.
Sound recording starts after shooting in (still picture) mode when
the image quality mode is set on non-compressed (NC) or PRO (PRO,
PRO-L, PRO-H), or in (text) mode. In this case, make sure that the
mark blinks on the LCD panel during recording.
Changing Flash Modes
The camera offers four flash modes. Select the flash mode best suited to your
photographic needs.
(Flash Off) : The flash is disabled even in dark conditions. Use this mode
for shooting where use of the flash is prohibited or where
adequate room illumination is available.
(Auto) : The flash fires automatically when it detects low ambient
light or backlighting.
lit : When you take a picture against the light or under strong
light, the subjects face may appear in the shade in the
resultant shot. Use forced flash to reduce this effect. In this
mode, the flash will fire regardless of the ambient light level.
blinking : Slows down the shutter release speed when the flash is
activated so that the subject is illuminated and the
background is captured too. If you use this mode when you
want to take a clear picture of your subject and capture the
background atmosphere, such as at a party, it reduces the
effect of only the background being darkened when the flash
fires.
* The factory default setting is flash off mode (Flash Off).
Effective Range of the Flash
When you shoot with the flash activated, the flash has an effective range of
about 0.6 2.5m (23.7 98.5 inches) for the telephoto setting. The subject
will appear dark in the picture if the light from the flash fails to reach it.
q Set the mode dial to [ ] or [ ].
w Press the button to select the flash
mode ( , , lit, blinking).
The flash mode switches each time you
press the button.
(Forced Flash)
(Slow Synchro)
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh RDC 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh RDC 7 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info