288843
123
Zoom out
Zoom in
Previous page
1/134
Next page
121
Miscellaneous
5
Batteries dead, improperly
installed or missing
AC adapter not attached correctly
Card door open
No buttons touched so auto
power-off function was activated
Dead batteries
Camera operated in extremely
high or low temperature location
Camera operated in dark area
requiring frequent use of the flash
Batteries dead, improperly
installed or missing
No power, or mode dial is not set
Shutter release button only
pressed halfway
SmartMedia memory card not
formatted (initialized)
No space on SmartMedia
memory card
No space on internal memory
SmartMedia memory card not
working (service life exceeded)
Card door open
Self-timer on
Flash is charging
SmartMedia memory card contact
surface dirty
The image confirmation time is
too short.
The LCD monitor is turned OFF.
The video I/O switch is set on
[IN].
Either set the NTSC video
system or disconnect the video
cable.
Dirty lens
Subject not in the center of the
autofocus field
Subject difficult to focus
Troubleshooting
Refer to the pointers listed below before submitting the equipment for repairs. If the problem persists
after trying the suggestions, contact the Ricoh service center listed at the back of this manual.
Power Source
Problem Cause Solution Page
Power will not
come on
Power cuts out
Battery quickly
consumed
Insert the batteries correctly or replace
them.
Attach correctly again.
Close the card door and retry starting.
Restart camera.
Replace with new batteries.
Recording and Playback
Shutter release
button pressed
but no image
recorded
Replace or reposition batteries.
Slide power on and set mode dial to [ ]
Press shutter release button all the way.
Format SmartMedia memory card.
Erase unimportant files or replace
SmartMedia memory card.
Erase unimportant files
Replace SmartMedia memory card.
Ensure that card door is securely closed.
Press the self timer button to disengage
the self timer recording mode.
Wait until flash LED ceases flashing.
Clean contact surface with soft dry cloth.
Make the image confirmation time longer.
Press the DISPLAY button to turn ON the
LCD monitor, or set [LCD Initialization] to
[ON].
Set video I/O switch is set on [OUT].
A video cable is connected when the
video system is set to PAL.
Clean lens with blower or soft dry cloth.
Use focus lock
Use focus lock or switch to manual focus.
27
29
32
41
27
Problem Cause Solution Page
Autofocus is on
but camera not
focusing
27
41
48
33
32, 94
94
32
32
61
48
31
108
41, 109
77
107
62
62, 63
Cannot confirm
a shot picture
No image on
the LCD
monitor
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh rdc 5300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh rdc 5300 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info