288842
51
Zoom out
Zoom in
Previous page
1/132
Next page
49
Basic Shooting
2
Forced, Slow synchro and Auto Flash Modes.
In forced or auto flash mode, the flash LED lights
(in red) when you press the shutter release button
lightly in low light conditions.
Note
The flash LED (red) blinks and the LCD
monitor is cleared while the flash is
charging. Pictures cannot be taken in this
state.
r Press the shutter release button down
fully without removing your finger.
A beep will sound and the picture you have shot
appears in the LCD monitor before it is
recorded. The available recording picture count
in the LCD panel or monitor is then
decremented by one.
Note
Moving the camera before the beep sounds may result in a blurred image.
The beep will sound continuously if recording fails. Stop recording and
reshoot the picture.
The available recording picture count in the LCD monitor may increase
depending on whether you turn on or off the camera, switch the mode
dial, or change the PIC mode.
If it is unnecessary to confirm the picture you have taken, press the or
button to start recording immediately. You may also change the shot
picture confirmation time. See Changing LCD Confirmation (p.109).
How to Cancel Recording
When you press down the shutter release button fully, the shot image will appear in
the LCD monitor. While the image is on display, you can cancel its recording. do the
following:
Press the MENU button. And press the ENTER button when a recording canceled
message is displayed.
Tips
Using the Camera for Extended Periods of Time
The camera will switch off automatically (auto power-off) to conserve the
battery if it is left idle (no buttons, switches or other controls operated) for
about 5 minutes. When you require more time to compose a shot, disable
the auto power-off feature. Have spare batteries or an AC adapter handy
before using the camera for an extended period of time. See Auto Power
Off Setting (p.103).
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh rdc 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh rdc 5000 in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info