639649
155
Zoom out
Zoom in
Previous page
1/178
Next page
Warning / Error Messages
5-25
1
1
1
1
5
Troubleshooting
SYSTEM HALT
Message Cause Solution
There is a slot in which the Eco-car-
tridge has not been inserted more
than a certain time.
Set an Eco-cartridge.
The thermistor connection of a
heater is defective.
Check the thermistor connection of the
drying heater.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
The thermistor is abnormal and the
temperature cannot be read nor-
mally.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
A head heater is disconnected.
The temperature abnormality of the
heater has been detected.
When this error occurred and if the
temperature abnormality cannot be
resolved, the power supply of the
machine is forcibly turned off.
Due to a certain error, the function
cannot be performed.
Return to the local screen, check the
error status and take a countermea-
sure.
There remains received data that
has not yet been printed.
Execute the data clear function.
( P.2-29)
The number of mounted heads is
“0”.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
The media width or the media
length required for printing is not
enough.
Change the media to the one with
enough width or length.
When the media width narrows
because the origin moved, slide the
origin to the right to widen the effective
media width.
The parameter has an error.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
Message Solution
Turn off the main power to the machine and turn it on after a while.
If the same error message appears again, check the number and contact your
local distributor to call for service.
(“000” is the error No.)
ERROR 6 2 7
RE - I NSERT CARTR I DGE
ERROR 7 0 2
THERM I STOR CONNECT
ERROR 7 0 3
! EXT HEATER BRK
ERROR 7 0 7
! H1 HEATER BREAK
ERROR 7 1 0
HEATER TEMP ERROR
ERROR 901
I NVAL I D OPERAT I ON
ERROR 9 0 2
DATA REMA I N
ERROR 9 0 d
NO HEAD SE L ECT
ERROR 9 0 f
PR I NT AREA SHORT
ERROR 0 4
PARAM ROM
SYSTEM HALT
000 : MESSAGE
155


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4160 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4160

Ricoh Pro L4160 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info