639649
152
Zoom out
Zoom in
Previous page
1/178
Next page
5-22
Error messages
When an error message is displayed, eliminate the error according to the chart below.
If the same error message appears again, contact your dealer or an office of RICOH to call for service.
Message Cause Solution
Head connection can not be con-
firmed.
Turn off the power to the machine and
turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
Head temperature can not be read.
The head memory has no data.
Solvent ink was used in the head for
water.
Abnormality of the Driver of the
Print head.
There is no PRAM.
Data transmission speed is too
fast.
Control circuit board is defective.
Data transmission speed is too
slow.
Control circuit board is defective.
The battery life end of the internal
clock is detected.
Contact your local distributor to call for
service.
Head data transferring sequence
error occurred.
Turn off the power to the machine and
turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
Sequential number abnormality of
the event log occurred.
An error occurred in the main PCB
1.2V power supply.
An error occurred in the main PCB
2.5V power supply.
An error occurred in the main PCB
3.3V power supply.
An error occurred in the main PCB
35-1 power supply.
An error occurred in the main PCB
VTT power supply.
An error occurred in the main PCB
35-2V power supply.
ERROR 1 0 8
HD CONNECT[ 12345678 ]
ERROR 1 0 8
HD THERMIS[ 12345678 ]
ERROR 1 0 8
HD MEM EMP[ 12345678 ]
ERROR 1 0 8
HD TYPE [ 12345678 ]
ERROR 1 2 e
Head Fai l ed[ xxxx]
ERROR 1 2 2
CHECK : SDRAM
ERROR 1 2 8
HDC F I FO OVER
ERROR 1 2 8
HDC F I FO UNDER
ERROR 1 2 9
BATTERY EXCHANGE
ERROR 1 3 0
HD DATA SEQ
ERROR 1 4 6
E-LOG SEQ
ERROR 1 5 1
Ma i n PCB V1 2R
ERROR 1 5 2
Ma i n PCB V2R5
ERROR 1 5 3
Ma i n PCB V3R3
ERROR 1 5 5
Ma i n PCB V3 5 - 1
ERROR 1 5 7
Ma i n PCB VTT
ERROR 1 5 8
Ma i n PCB V352
152


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4160 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4160

Ricoh Pro L4160 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info