639649
144
Zoom out
Zoom in
Previous page
1/178
Next page
5-14
When media heaves up at feeding
We call the status of heaving media at feeding “cockling”.
When media cockling occurs, check the following items:
When the Leading Edge of the Paper Gets Wrinkled
If the temperature setting for the heater in the profile is set too high, and adjusting the temperature after
receiving the print data takes longer time, wrinkles may occur in the leading part of the print media. If wrinkles
occur, perform the following procedures:
1
Wait until the heater reaches its set temperature
before transmitting the print data.
You can shorten the time to adjust the heater temperature after receiving the print data and avoid
wrinkles from occurring in the paper by preheating the heater to its set temperature.
Refer to P.2-17 “Changing the Temperature Settings for the Heaters”.
2
Before transmitting the print data, perform a
preparatory feed from several dozens of centimeters
to up to one meter to remove the wrinkles in the
leading edge of the media.
Refer to P.5-14 “When media heaves up at feeding”.
Note/ checking items Measures
Checking media set status (1) Check that the media is set straight and reset it.
Adjusting heater temperature
(1) Raise the pre-heater temperature by 5 to 10 degrees.
(2) Lower all heaters’ temperatures. (When you lower the heater
temperature, drying time may not be enough. Lower the
FEED SPEED.)
Media feeding
(1) For roll media, feed the media by about tens of centimeters
to one meter.
(2) For leaf media, press and perform feed/ back
feed.
Do not leave the media in the heater warm-
ing status
(1) Do not start printing with the media cockled because it may
cause media jam.
Heighten the head
(1) For the thick media, heighten the head from L to M before
printing.
144


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4160 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4160

Ricoh Pro L4160 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info